Incwadi Yomsebenzisi ye-BECA BHT-2000GALTP Smart Floor Heating Thermostat

1. Isingeniso

Thank you for choosing the BECA BHT-2000GALTP Smart Floor Heating Thermostat. This device is designed to provide intelligent and efficient control over your electric floor heating system, ensuring optimal comfort and energy savings. Featuring a modern black screen display and intuitive touch controls, this thermostat offers 5+2 weekly programming capabilities to suit your lifestyle.

Umfanekiso 1: Ngaphambili view of the BECA BHT-2000GALTP Smart Floor Heating Thermostat, displaying temperature, time, and mode indicators.

2. Ulwazi Lokuphepha

Please read this section carefully before installation and operation to prevent personal injury or damage to the product.

• Installation must be carried out by a qualified electrician in accordance with local electrical codes and regulations.
• Always disconnect power at the circuit breaker before installing, cleaning, or servicing the thermostat.
• Ungayivezi i-thermostat emanzini noma kumswakama oweqile.
• Qinisekisa ukuthi zonke izintambo ezixhunywe kuzo ziphephile futhi zivalekile ngendlela efanele.
• Le thermostat yenzelwe ukusetshenziswa endlini kuphela.

3. Okuqukethwe Kwephakheji

Qinisekisa ukuthi zonke izinto zikhona kuphakheji:

• BECA BHT-2000GALTP Thermostat Unit
• Izikulufu zokukhweza (2)
• Incwadi Yomsebenzisi (le dokhumenti)

4. Imininingwane

5. Ukufakwa (Ukusethwa)

The thermostat is designed for installation into a standard 86mm square or European 60mm round wall box. Ensure the power supply is disconnected before beginning installation.

1. Turn off the main power supply to the heating system at the circuit breaker.
2. Separate the mounting plate from the thermostat unit by gently prying the bottom clips.
3. Connect the wiring according to the diagram in Section 6.
4. Mount the back plate into the wall box using the provided screws.
5. Align the thermostat unit with the mounting plate and snap it into place.
6. Buyisela amandla ohlelweni lokushisa.

Umfanekiso 2: I-Side profile of the thermostat, illustrating its compact design for wall mounting.

6. Umdwebo Wiring

Proper wiring is essential for the safe and correct operation of your thermostat. Refer to the diagrams below and ensure all connections are secure.

Umfanekiso 3: Ngemuva view of the thermostat with terminal labels for power, load, and NTC sensor.

Figure 4: Detailed wiring schematic for GA, 3A, Water Heating models. Connect Live (L) and Neutral (N) to terminals 3 and 4 respectively. Connect the heating load to terminals 1 and 2. The NTC floor sensor connects to terminals 5 and 6.

Izincazelo zetheminali:

• N: Neutral wire for power supply.
• L: Live wire for power supply.
• 1, 2: Load connections for the heating element.
• 5, 6: NTC sensor connections (for floor temperature sensing).

7. Ukusebenza

The thermostat features a clear display and touch buttons for easy operation.

Figure 5: Thermostat display and button function overview.

Imisebenzi Yenkinobho:

• M (Imodi): Press to switch between Manual mode and Program mode.
• ⏱ (Clock/Time): Press to set time and date. Hold to enter programming settings.
• ⏻ (Amandla): Press to turn the thermostat ON/OFF.
• ▲ (Up Arrow): Increase temperature or adjust settings.
• ▼ (Down Arrow): Decrease temperature or adjust settings.

Ukubeka Isikhathi Nosuku:

1. With the thermostat ON, press the ⏱ button once. The hour digit will flash.
2. Sebenzisa ▲ futhi ▼ ukulungisa ihora.
3. Cindezela ⏱ futhi ukuze ushintshele kumaminithi, bese usebenzisa ▲ futhi ▼ ukulungisa.
4. Cindezela ⏱ again to move to the day of the week (1-7, Monday-Sunday), then use ▲ futhi ▼ ukulungisa.
5. Cindezela ⏱ again or wait 10 seconds to save and exit.

8. Programming (5+2 Weekly Schedule)

The thermostat supports 5+2 weekly programming, allowing you to set different temperatures for weekdays (Monday-Friday) and weekends (Saturday-Sunday) across six time periods each day.

1. With the thermostat ON, hold the ⏱ button for 3-5 seconds to enter programming mode. The display will show "WEEK" and the first period (Period 1) for weekdays.
2. Sebenzisa ▲ futhi ▼ to adjust the start time for Period 1.
3. Cindezela ⏱ to move to the temperature setting for Period 1. Use ▲ futhi ▼ to adjust the desired temperature.
4. Repeat steps 2 and 3 for Period 2 through Period 6 for weekdays.
5. After setting all 6 periods for weekdays, the display will switch to weekend programming (Saturday-Sunday). Repeat the process for Period 1 through Period 6 for weekends.
6. Once all periods are set, press ⏱ again or wait 10 seconds to save the settings and exit programming mode.

Default Program Settings (Example):

9. Isondlo

The BECA BHT-2000GALTP thermostat requires minimal maintenance.

• Ukuhlanza: Sula isibonisi bese u-casing ngesithambile, damp indwangu. Ungasebenzisi izinto zokuhlanza abrasive noma izincibilikisi.
• Azikho Izingxenye Ezisetshenziswa Umsebenzisi: Do not attempt to open or repair the thermostat yourself. Refer all servicing to qualified personnel.

10. Ukuxazulula izinkinga

If you encounter issues with your thermostat, refer to the following common problems and solutions:

11. Iwaranti kanye Nokusekela

For warranty information or technical support, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: BECA