TechCare Massager TENS Unit Muscle Stimulator User Manual

Isingeniso

The TechCare Massager TENS Unit is a dual-channel electrical nerve and muscle stimulator designed to provide temporary relief from pain associated with sore and aching muscles due to strain from exercise or normal household and work activities. This device utilizes Transcutaneous Electrical Nerve Stimulation (TENS) and Electrical Muscle Stimulation (EMS) technologies to deliver low-voltage pulses to the skin, stimulating nerve fibers and promoting muscle contraction and relaxation. Please read this manual thoroughly before use to ensure safe and effective operation.

Yini Okufakiwe

Carefully unpack your TechCare Massager TENS Unit and verify that all items listed below are present and in good condition.

• 1 x TechCare Massager Controller
• 4 x Large/Medium Electrode Pads (2 large, 2 medium)
• 2 x Small Electrode Pads
• 2 x Electrode Cables
• 1 x Isikhwama Sokuthwala
• 1 x User's Manual (this document)
• 1 x Ikhebula Leshaja ye-USB
• 1 x Electrode Pad and Wire Holder
• 1 x Treatment Points Chart

Image: All components included in the TechCare Massager TENS Unit package.

Idivayisi Iphelileview

Familiarize yourself with the main components and controls of your TechCare Massager TENS Unit.

Image: Front panel of the TENS Unit showing the display and control buttons.

• Inkomba Yesikhathi: Displays the remaining session time.
• Inkomba Yebhethri: Ibonisa ileveli yebhethri yamanje.
• Izindlela zokubhucunga: Icons representing the 24 preprogrammed massage modes.
• Strength Indicator: Bar graph showing the current intensity level (20 levels).
• Mode Selection (M) Button: Press to cycle through the 24 massage modes.
• Strength Adjuster (+/-) Buttons: Press '+' to increase intensity, '-' to decrease intensity.
• Time Adjuster (T) Button: Press to adjust the session duration (each press adds 20 minutes).

Setha

1. Ukushaja Idivayisi

1. Connect the USB charger cable to the charging port on the device.
2. Xhuma enye ingxenye yekhebula le-USB ku-adaptha yamandla ye-USB ehambisanayo (ayifakiwe) noma imbobo ye-USB yekhompyutha.
3. The battery indicator on the display will show charging status. A full charge can take up to 10 hours for the initial charge.
4. Once fully charged, the device can provide up to 20 hours of use.

2. Attaching Electrode Pads and Cables

1. Ensure the device is turned off before connecting or disconnecting pads.
2. Gently peel the electrode pads from their protective film. Retain the film for storage.
3. Snap the electrode cables onto the metal studs of the electrode pads. Ensure a secure connection.
4. Insert the pin connectors of the electrode cables firmly into the output ports on the top or bottom of the TENS unit.

3. Applying Electrode Pads

1. Clean and dry the skin area where you intend to place the pads. Avoid applying to broken or irritated skin.
2. Place the electrode pads firmly on the desired treatment area. Refer to the included Treatment Points Chart for recommended placements.
3. Ensure pads are not touching each other.

Isithombe: Example of electrode pad placement for various body areas.

Imiyalelo yokusebenza

1. Vula/Vala

• To turn on the device, press and hold the 'M' (Mode Selection) button for a few seconds until the screen illuminates.
• To turn off the device, press and hold the 'M' button again for a few seconds until the screen turns off.

2. Selecting a Massage Mode

• After powering on, the device will display the current mode.
• Press the 'M' button repeatedly to cycle through the 24 preprogrammed massage modes (e.g., Tapping, Acupuncture, Deep Tissue, Foot, Cupping, Combo).
• Select the mode that best suits your needs.

3. Ukulungisa Amandla

• Once a mode is selected, use the '+' button to increase the intensity of the stimulation.
• Use the '-' button to decrease the intensity.
• There are 20 levels of adjustable strength. Start with a low intensity and gradually increase until you feel a comfortable, yet effective, sensation. Avoid setting the intensity too high, which can cause discomfort.

4. Setting Session Time

• Press the 'T' (Time Adjuster) button to set the desired session duration.
• Each press of the 'T' button will add 20 minutes to the session time.
• Idivayisi izovala ngokuzenzakalelayo uma isikhathi esibekiwe sesidlulile.

Isondlo

1. Ukuhlanza Idivayisi

• Turn off the device and disconnect all cables before cleaning.
• Sula idivayisi ngento ethambile, ethi damp indwangu. Ungazisebenzisi izinto zokuhlanza ezilumayo noma ucwilise ucingo emanzini.
• Ensure the device is completely dry before storing or next use.

2. Caring for Electrode Pads

• After each use, gently remove the pads from your skin and reattach them to their protective film.
• If the pads lose their adhesiveness, clean them with a small amount of water and let them air dry. This can help restore stickiness.
• Replace pads when they no longer adhere well to the skin, as poor adhesion can reduce effectiveness and cause discomfort.

3. Isitoreji

• Store the device and accessories in the provided carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Gcina endaweni lapho izingane zingafinyeleleki khona.

Ukuxazulula inkinga

Imininingwane

• Ubukhulu bomkhiqizo: 3.3 x 0.2 x 2.5 amayintshi
• Isisindo: 2 amakhilogremu
• Umkhiqizi: Otto Trading
• Inombolo Yemodeli (ASIN): B01JAVH23C
• Izindlela zokubhucunga: 24 preprogrammed modes
• Amazinga Okuqina: 20 amazinga adjustable
• Umthombo wamandla: Rechargeable internal lithium battery
• Impilo Yebhethri: Kuze kube ngamahora angu-20 ngokukhokhiswa ngakunye

Iwaranti kanye Nokusekela

TechCare Massager offers a Iwaranti yempilo yonke and Hassle-Free Return policy for this product. For any questions, concerns, or warranty claims, please contact TechCare Massager customer support directly.

Umkhiqizi: Otto Trading

Umdayisi: I-TechCare Massager

For support, please visit the TechCare Massager store on Amazon or refer to the contact information provided with your purchase documentation.