Isingeniso
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Satco S9750 30W LED HID Replacement Light Bulb. This Hi-Pro multi-beam LED lamp is designed for industrial and commercial applications, offering high lumen output and adjustable, multi-directional light. It is a direct wire range voltage 100-277V replacement for HID, CFL, and incandescent bulbs, approved for totally enclosed fixtures.
Ulwazi Lokuphepha
- ISEXWAYISO: Ingozi yokushaqeka ngogesi. Nqamula ugesi ngaphambi kokufakwa noma ukulungiswa.
- Qinisekisa umthamo wokunikezelatage is compatible with the bulb's operating voltage (100-277V).
- Ungaliqaqi noma ulishintshe ibhalbhu. Azikho izingxenye ezilungele ukusetshenziswa ngaphakathi.
- This bulb is suitable for use in damp locations and approved for totally enclosed fixtures.
- Always handle the bulb by its base to avoid damaging the LED panels.
- Xhumana nosebenza ngogesi oqeqeshiwe uma ungaqiniseki nganoma iyiphi ingxenye yenqubo yokufaka.
Okuqukethwe Kwephakheji
Qinisekisa ukuthi zonke izingxenye zikhona futhi azilimele ngaphambi kokuqhubeka nokufaka.
- 1 x Satco S9750 30W LED HID Replacement Light Bulb
Ukusetha nokufaka
Follow these steps for proper installation of your Satco S9750 LED HID Replacement Light Bulb:
- Ukunqanyulwa kwamandla: Before beginning any installation, ensure the power to the fixture is turned off at the circuit breaker.
- Susa I-Old Bulb: Carefully remove the existing HID, CFL, or incandescent bulb from the fixture.
- I-Ballast Bypass: This LED bulb requires a direct wire connection and bypasses the existing ballast. If your fixture has a ballast, it must be bypassed or removed by a qualified electrician. The bulb operates on a direct wire range voltage ye-100-277V.
- Hlola Ukuhambisana Kwesakhiwo: Ensure the fixture has a medium (E26) base. The minimum compartment size for enclosed fixtures is 11 inches (Length) x 8 inches (Width) x 8 inches (Depth). The lamp length is 6.37 inches, and the diameter is 3.18 inches when closed, expanding to 7.68 inches when open.
- Faka I-bulb entsha: Screw the Satco S9750 LED bulb firmly into the medium (E26) base socket. Do not overtighten.
- Buyisela Amandla: Once the bulb is securely installed and any necessary ballast bypass is complete, restore power at the circuit breaker.
Imiyalelo yokusebenza
The Satco S9750 features adjustable light panels, allowing you to customize the beam angle for various lighting needs.
- Ukulungisa i-engeli ye-Beam: The light panels can be manually adjusted and locked into place to create three distinct beam angle options:
- 360° Beam: Panels fully closed, providing a wide, omnidirectional light spread (approx. 3.2 inches width).
- 270° Beam: Panels partially open, directing light over a broader area (approx. 6.8 inches width).
- 180° Beam: Panels fully open, concentrating light in a specific direction (approx. 7.7 inches width).
- Gently move the panels to the desired position until they click or lock into place. Avoid excessive force.
Isondlo
The Satco S9750 LED bulb requires minimal maintenance.
- Ukuhlanza: Ensure power is disconnected before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
- Ukuhlola: Periodically check the bulb and fixture for any signs of damage or loose connections.
Ukuxazulula inkinga
If your Satco S9750 LED bulb is not functioning correctly, consider the following:
- Akukho Ukukhanya:
- Hlola ukuthi ugesi ophakelwa ku-fixture uvuliwe yini.
- Ensure the bulb is screwed in tightly to the socket.
- Verify that the ballast has been properly bypassed or removed.
- Inspect the circuit breaker for any tripped circuits.
- Ukukhanya Okucwayizayo:
- Ensure the bulb is securely seated in the socket.
- Hlola ukunikezwa kwamandla okuzinzile.
If issues persist after performing these checks, contact customer support.
Imininingwane
| Isici | Ukucaciswa |
|---|---|
| Ibhrendi | ISatco |
| Inombolo Yemodeli | S9750 |
| Uhlobo Olukhanyayo | I-LED |
| Wattage | 30 Watts |
| HID Okulingana | 150 Watt |
| CFL Equivalent | 55 Watt |
| I-Incandescent Equivalent | 200 Watt |
| I-Bulb Base | I-E26 (Isisekelo Esimaphakathi) |
| Voltage | 100-277 Volts AC |
| Ukushisa Kombala | 5000 Kelvin |
| I-lumens | 3,900 Lumens |
| Inkomba Yokunikeza Umbala (CRI) | 80 |
| I-Angle ye-Beam | Adjustable (180°, 270°, 360°) |
| Isilinganiso se-IP | IP65 |
| I-Operating Temperature Range | -20°C kuya ku-65°C |
| Okubalulekile | Ipulasitiki |
| Izitifiketi | ETL, RoHS, UL Listed |
| Lamp Length (closed) | 6.37 amayintshi |
| Diameter (closed) | 3.18 amayintshi |
| Diameter (open) | 7.68 amayintshi |
| Isisindo sento | 4.8 amakhilogremu |
Iwaranti kanye Nokusekela
The Satco S9750 LED HID Replacement Light Bulb comes with a Iwaranti ekhawulelwe yeminyaka engu-5.
For warranty claims, technical support, or further assistance, please contact Satco customer service through their official website or the retailer where the product was purchased. Please have your model number (S9750) and proof of purchase available when contacting support.