Geberit G243173001 Water Supply Hose

Isingeniso

This manual provides essential instructions for the safe and correct installation, operation, and maintenance of the Geberit G243173001 Water Supply Hose. This hose is specifically designed to connect the water supply to the Geberit Duofix Carrier 111.798, which is used with bidet seats. Please read this manual thoroughly before installation and keep it for future reference.

Ulwazi Lokuphepha

• Njalo vala amanzi ayinhloko ngaphambi kokuqala noma yimuphi umsebenzi wokufaka amapayipi.
• Ensure all connections are hand-tightened first, then gently tightened with a wrench to prevent leaks without overtightening.
• Inspect the hose and connections regularly for any signs of wear, damage, or leaks.
• Uma ungenaso isiqiniseko nganoma yisiphi isinyathelo, thintana nomuntu oqeqeshiwe.

Okuqukethwe Kwephakheji

The Geberit G243173001 package includes:

• 1 x Geberit G243173001 Water Supply Hose

No additional tools or components are included with this product.

Imininingwane

Ukusetha nokufaka

Before you begin, ensure the main water supply to the toilet area is turned off. You may need a wrench for tightening connections.

1. Lungiselela Indawo: Turn off the main water supply valve. Flush the toilet to drain the tank and bowl.
2. Thola Amaphuzu Okuxhumana: The Geberit G243173001 hose has two distinct ends. One end connects to the water supply valve, and the other connects to the Geberit Duofix Carrier 111.798.
3. Xhumana Nokunikezwa Kwamanzi: Carefully attach one end of the hose to the water supply valve. Hand-tighten first, then use a wrench for a quarter to half turn until snug. Do not overtighten.


Image: Water supply connection point of the hose.

4. Connect to Duofix Carrier: Attach the other end of the hose to the designated water inlet on the Geberit Duofix Carrier 111.798. Hand-tighten, then use a wrench for a snug fit.


Image: Carrier connection point of the hose.

5. Ukuhlola Kokugcina: Qinisekisa ukuthi kokubili ukuxhumana kuvikelekile.

Isithombe: Kuphelileview of the Geberit G243173001 Water Supply Hose.

Isebenza

After installation, slowly turn on the main water supply valve. Check all connections for leaks immediately. If no leaks are present, the system is ready for use with the Geberit Duofix Carrier and connected bidet seat.

Isondlo

• Periodically inspect the hose and its connections for any signs of wear, cracks, bulges, or corrosion.
• Check for any drips or moisture around the connection points. Address any leaks promptly.
• Replace the hose if any damage is observed to prevent potential water damage.

Ukuxazulula inkinga

Ukuvuza Ekuxhumekeni

• Imbangela: Loose connection or damaged washer/gasket.
• Isixazululo: Turn off water supply. Gently tighten the connection with a wrench. If the leak persists, check the washer/gasket inside the connector for proper seating or damage. Replace if necessary.

Akukho Ukugeleza Kwamanzi

• Imbangela: Water supply valve is off or partially closed.
• Isixazululo: Ensure the main water supply valve and any inline shut-off valves are fully open.

Ulwazi Lwewaranti

For detailed warranty information regarding the Geberit G243173001 Water Supply Hose, please refer to the official Geberit website or contact Geberit customer service directly. Warranty terms and conditions may vary.

Ukwesekwa Kwamakhasimende

If you have any questions, require technical assistance, or need to order replacement parts, please visit the official Geberit website or contact their customer support department. Contact details can typically be found on the Geberit webindawo noma ukupakishwa komkhiqizo.