Progress Lighting P6071-31 Outdoor Wall Lantern Instruction Manual

Isingeniso

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

Ulwazi Lokuphepha

ISEXWAYISO: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.

ISEXWAYISO: Lo mkhiqizo kufanele ufakwe ngokuhambisana nekhodi yokufaka esebenzayo ngumuntu ojwayelene nokwakhiwa nokusebenza komkhiqizo kanye nezingozi ezihilelekile.

KUBALULEKILE: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.

This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.

Okuqukethwe Kwephakheji

Qinisekisa ukuthi zonke izingxenye zikhona ngaphambi kokuqala ukufakwa.

Light Fixture Assembly
Mounting Hardware Kit (screws, wire nuts, mounting strap)
Imiyalelo yokufaka

Diagram showing all components included in the package for the outdoor wall lantern.

Umfanekiso 1: Kuqhume view of the P6071-31 outdoor wall lantern components.

Imininingwane

Isibaluli	Inani
Ibhrendi	Intuthuko Yokukhanyisa
Imodeli	P6071-31
Umbala	Mnyama
Okubalulekile	I-Aluminium
Isitayela	Yendabuko
Ifomu Lokulungisa Okukhanyayo	Udonga
Ubukhulu (approx.)	Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2"
Uhlobo Lwebhabhu	Incandescent, 100W Medium Base (Max)
Voltage	120V
Isilinganiso Sendawo	cCSAus Wet location listed

Dimensional drawing of the Progress Lighting P6071-31 outdoor wall lantern showing height, width, and depth measurements.

Figure 2: Product dimensions for the P6071-31 fixture.

Ukusetha nokufaka

Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.

Prepare the Mounting Strap: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
Yenza ukuxhuma kukagesi:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- Faka ngokucophelela zonke izintambo ebhokisini le-outlet.
Mount the Fixture: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
Faka I-bulb: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
Buyisela Amandla: Vula amandla futhi ku-circuit breaker eyinhloko.

Detailed diagram showing the electrical wiring connections and mounting steps for the outdoor wall lantern.

Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.

Imiyalelo yokusebenza

Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.

Ensure the light bulb is securely screwed into the socket.
Use a standard wall switch to turn the light fixture on or off.
For optimal performance and longevity, use bulbs within the specified wattagibanga.

Isondlo

Regular maintenance will help preserve the appearance and functionality of your outdoor wall lantern.

Ukuhlanza: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
Ukushintshwa kwe-Bulb: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
Ukuhlola: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.

Eduze view of the Progress Lighting P6071-31 outdoor wall lantern, highlighting the black finish and clear water glass panels.

Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.

Ukuxazulula inkinga

Uma uhlangabezana nezinkinga ngohlelo lwakho, bheka izinkinga ezilandelayo nezisombululo:

Inkinga	Imbangela Engenzeka	Isixazululo
Ukukhanya akukhanyi.	Ugesi ucinyiwe ku-circuit breaker. Izintambo ezixegayo. Isibani esingasebenzi kahle. Iswishi yodonga enephutha.	Check circuit breaker and ensure it is in the "ON" position. Turn off power, check all wire connections and tighten if necessary. Replace bulb with a new, working one. Consult a qualified electrician to check the switch.
Ukucwayiza okukhanyayo.	Isibani esixegayo. Izintambo ezixegayo. Uhlobo/i-wat yebhalbhu engalungiletage.	Qinisa isibani kusokhethi. Turn off power, check and tighten wire connections. Ensure bulb is correct type and wattage (ubuningi be-incandescent engu-100W).
Ama-hum okuqina.	Ukukhweza okuxekethile. Iswishi ye-dimmer engahambelani (uma ikhona).	Ensure fixture is securely mounted to the outlet box. If using a dimmer, ensure it is compatible with incandescent loads.

Iwaranti kanye Nokusekela

Lo mkhiqizo umbozwe yi-a Iwaranti enomkhawulo yeminyaka emi-1 from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.

You can find more information and contact details on the official Progress Lighting webindawo: www.progresslighting.com