Mega Motion NM7001

Mega Motion Vance Ultimate Power Recliner Chair NM7001 Instruction Manual

Model: NM7001

Isingeniso

This manual provides comprehensive instructions for the assembly, safe operation, and proper maintenance of your Mega Motion Vance Ultimate Power Recliner Chair, model NM7001. Please read this manual thoroughly before using the chair to ensure safe and efficient operation.

Ulwazi Lokuphepha Olubalulekile

WARNING: To reduce the risk of injury, read all instructions before using the chair.

  • Always use the lift and recline mechanism with caution. Ensure the area around the chair is clear before operating.
  • Do not exceed the maximum weight limit of 500 pounds (227 kg) to ensure stability and safety.
  • Gcina izingane nezilwane ezifuywayo kude nezingxenye zesihlalo ezihambayo.
  • Ensure all electrical cords are properly routed and not pinched or damaged.
  • Ungavumeli noma ubani ukuthi ahlale endaweni yezinyawo uma inwetshiwe.
  • Disconnect power before cleaning or servicing the chair.
  • This chair is designed for indoor use only.

Isiphakamiso 65 Isexwayiso: Lo mkhiqizo ungakuchaya kumakhemikhali kuhlanganise nothuli lwezinkuni, olwaziwa yiSifundazwe saseCalifornia ukuthi lubanga umdlavuza. Ukuze uthole ulwazi olwengeziwe vakashela ku www.P65Izixwayiso.ca.gov.

Iziyalezo Zomhlangano

Your Mega Motion Vance Ultimate Power Recliner Chair requires minimal assembly. It is recommended that two people assemble the chair due to the weight of some components.

Unboxing kanye Ukulungiselela

  1. Carefully open the shipping carton. Retain all packaging materials until assembly is complete and you are satisfied with the product.
  2. Remove all components from the carton. Inspect for any damage.
  3. Place the base of the chair in the desired location, ensuring there is enough space for reclining and lifting functions.
Mega Motion Vance Power Recliner Chair in its shipping box

Figure 1: The Mega Motion Vance Power Recliner Chair as received in its shipping carton. Note the 'Handle with Care' and 'Up' indicators.

Attaching the Chair Back

  1. Align the metal receivers on the chair back with the posts on the chair base.
  2. Slide the chair back down onto the posts until it is securely seated. You may hear a click.
  3. Locate and connect any electrical cables between the chair back and the base. Ensure connections are firm.
  4. Connect the power transformer to the chair's power input and then plug the transformer into a grounded electrical outlet.

Imiyalelo yokusebenza

The Mega Motion Vance Ultimate Power Recliner Chair features a simple two-button handwand for controlling the lift and recline functions.

Handwand Control

The handwand is typically located in a side pocket or attached to the chair arm. It features two buttons:

  • Inkinobho Ephezulu: Press and hold to raise the chair to a standing position or to bring it to an upright seated position from a reclined state.
  • Inkinobho ephansi: Press and hold to recline the chair or to lower it from a lifted position to a seated position.

The handwand also includes a USB port for charging small electronic devices.

Chair Positions

This chair offers three primary positions:

  1. Isikhundla Sokuhlala Siqondile/Siqondile: The standard sitting position.
  2. Partial Recline Position: A comfortable position for reading or watching television.
  3. Full Recline Position: A fully extended position for resting or sleeping.
Mega Motion Vance Power Recliner Chair in upright seated position

Figure 2: Chair in upright seated position.

Mega Motion Vance Power Recliner Chair in lifted position, assisting user to stand

Figure 3: Chair in lifted position, assisting with standing.

Mega Motion Vance Power Recliner Chair in fully reclined position

Figure 4: Chair in fully reclined position.

Isipele Sebhethri Esiphuthumayo

Uma kwenzeka amandla outage, the chair is equipped with an integrated emergency battery backup system. This allows for a limited number of operations to return the chair to a safe, seated position. Ensure batteries are installed and checked periodically.

Ukunakekela Nokunakekela

Regular care will extend the life and appearance of your recliner chair.

  • Indwangu Yokuhlanza: For general cleaning, use a soft cloth and mild soap solution. Test on an inconspicuous area first. Do not saturate the fabric.
  • Intambo Yamandla: Periodically inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
  • Izingxenye Ezinyakazayo: The chair's mechanisms are designed to be maintenance-free. Do not attempt to lubricate or disassemble moving parts.
  • Ukubekwa: Avoid placing the chair in direct sunlight or near heat sources, as this can cause fabric fading or damage.

Ukuxazulula inkinga

If you experience issues with your Mega Motion Vance Ultimate Power Recliner Chair, refer to the following common solutions:

InkingaImbangela EngenzekaIsixazululo
Chair does not operate.Power cord unplugged, circuit breaker tripped, handwand disconnected.Ensure power cord is securely plugged into a working outlet. Check circuit breaker. Verify handwand cable is firmly connected to the chair.
Chair moves slowly or intermittently.Low battery in backup system (if applicable), power supply issue.Check and replace batteries in the emergency backup system. Ensure the chair is connected to a stable power source.
Imisindo engavamile ngesikhathi sokusebenza.Obstruction in mechanism, loose components.Inspect for any objects obstructing the moving parts. Ensure all assembly connections are secure. If noise persists, contact customer support.

If these steps do not resolve the issue, please contact Mega Motion customer support for further assistance.

Imininingwane Yomkhiqizo

Diagram showing features and benefits of AS-7001 recliner with dimensions and fabric options

Figure 5: Key features and dimensional specifications of the Mega Motion Vance Power Recliner Chair.

  • Imodeli: NM7001 (also referred to as AS-7001 in some documentation)
  • Isisindo Somthamo: 500 lbs (227 kg)
  • Izikhundla: 3-position, all-electric lift and recline
  • Ukwakha: Heavy-duty, furniture-grade hardwood/plywood frame
  • Indwangu: Heavy-duty polyester knit fabric (Cafe Finish/Walnut)
  • Indlela: Counter-balanced recliner mechanism for smooth, quiet operation
  • Izici: Split back design, chaise seat, integrated emergency battery backup, adjustable steel leg levelers, convenient side pocket with USB port in handwand.
  • Ubukhulu Bomkhiqizo (Okulinganiselwa):
    • Ubukhulu obuphelele: 44"D x 39.5"W x 44"H
    • Outside Arm Width: 39.5"
    • Arm Height from Seat: 6.5"
    • Seat Width: 27"
    • Seat to Floor: 20"
    • Seat Depth: 20.5"
    • Top of Back to Seat: 27"
    • Top of Back to Floor: 43.5"
  • Overall Chair Weight: 143 lbs (64.8 kg)

Ulwazi Lwewaranti

Mega Motion provides the following warranty for the Vance Ultimate Power Recliner Chair, model NM7001:

  • Izingxenye Nensizakalo: Iwaranti enomkhawulo yonyaka ongu-1.
  • Lift Frame: Lifetime limited warranty.

Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your purchase or contact Mega Motion customer support.

Ukwesekwa Kwamakhasimende

For further assistance, technical support, or warranty inquiries regarding your Mega Motion Vance Ultimate Power Recliner Chair, please contact Mega Motion customer service.

Ulwazi lokuxhumana:

  • Webindawo: Visit the official Mega Motion webiwebhusayithi yezinsiza zokusekela kanye nemininingwane yokuxhumana.
  • Ucingo: Refer to your product packaging or the Mega Motion webisayithi lenombolo yocingo yesevisi yekhasimende yamanje.

When contacting support, please have your model number (NM7001) and proof of purchase readily available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.