Candy 92130871 Washing Machine Replacement Belt Instruction Manual

1. Isingeniso

This instruction manual provides essential information for the proper installation, maintenance, and troubleshooting of the Candy 92130871 washing machine replacement belt. Please read this manual thoroughly before attempting any installation or repair to ensure safe and effective operation.

2. Ulwazi Lokuphepha

Always disconnect the washing machine from the power supply before attempting any installation, maintenance, or repair work. Failure to do so can result in electric shock or serious injury.
Gqoka izinto zokuzivikela ezifanele, njengezigilavu, ukuze uvimbele ukulimala.
Uma ungaqiniseki nganoma yisiphi isinyathelo, thintana nochwepheshe oqeqeshiwe.
Gcina izingane nezilwane ezifuywayo kude nomshini ngesikhathi sokulungisa.
Ensure all tools are in good condition and used correctly.

3. Umkhiqizo Uphelileview

The Candy 92130871 is an authentic replacement drive belt designed for various Candy washing machine models. This belt is crucial for transmitting power from the motor to the drum, enabling the washing machine to operate correctly.

Image 1: The Candy 92130871 washing machine replacement belt. This image shows the black rubber belt, typically ribbed on one side for grip.

4. Ukuhambisana

This replacement belt (Manufacturer Code: 92130871) is compatible with a wide range of Candy washing machine models. Please verify your washing machine's model number against the list below to ensure proper fitment.

Amamodeli ahambisanayo afaka:

CANDY AC16, ACTIVA50, ACTIVA51, ACTIVA60, ACTIVA61, ACTIVA64SLIM, ACTIVA66SL, ACTIVA6CI
ALISE060, ALISE065, ALISE066, ALISE'160XT, ALISE190X, ALISE6190X0, ALISE'.610B, ALISE'65 ARG, ALISE'650, ALISE'696
AQUAV.6, AQUAVIVA60, AQUAVIVA63, AQUAVIVA650, AQUAVIVA66
C36ZXT, C532, C535T, C536T, C55XT (I), C564XT plata, C577T, C588XT, C58XT (I), C6077T, XT AQUAM, CM.608XT (I)
C616XT (I), C625XT, C634XT, C634XT (CE), C634XT (NORD), C636XT, C647XT (I), C657XT (I)
CB52T, CB52TCKD, CB53XTR, CB612XT, CB613TR, CB623XTTR HC, CB62T, CB62TR, CB633XTR, CB634XT, CB63TES, CB63TR, CB63TRCKD, CB63XTR
CE520T, CE530, CE615, CE621T, CE623R, CE625TR, CE629T, CE637XT, CE650TR
CG5444T, CG5544T, CG623T, CG644.3T, CG644T, CG654XT, CGAQ665XT
CH630, CHIARA51XT, CHIARA540XTR, CHIARA552TR, CHIARA55XTR, CHIARA5XT, CHIARA5XTV, CHIARA642XTR, CHIARA65XTR, CHIARA65XT, CHIARA65XTV, CHIARA65XTR, CHIARA65X2XTR, CHIARA6XT
CI50XTR, CI537T, CI57TR, CI589XT, CI60XTR, CI60XTR H/C, CI620TP, CI622T, CI624T, CI626XT, CI627T, CI637T, CI648XT, CI658XT
CJ6514, CJ543T, CJ613XT, CJ643T, CJA52T
CL66XT, CN50T, CN50T-04S, CN60T, CN63T, CN63T CI, CN63TCKD, CN63TRU-03S
IPC 610, CR61, CS47XT (I), CSB640XTR, CSE640XTR, CSE615XT, CM.SE635XT, CSG624T, CSI615T, CSI635XTR, CSI635XTRSY, CSN62T, CSN62T-03S
EXCL.S641XTR, EXCLUS.60, EXCLUS.6000, EXCLUS540XTR, EXCLUS65XTR
HOL165XTR, HOL62, VACANZAS 6, HOLIDAY161, HOLIDAY60, HOLIDAY603, HOLIDAY61
ICL60T, LADYC.623CKD, SEL.S643XTR, SELEC 0.631 XTR, SELECTA600, SELECTA60X, SELECTA61XXTR
SL5000EXC, SL50EXCLUS., SLIM644AQUAV, SLIMMY508XT, SLIMMY634XT, SLIMMY655XT, SLIMMY6AQUAV, SLIMMYCB62XT, WM601.

5. Ukufakwa (Ukusethwa)

Replacing a washing machine drive belt requires careful attention. Follow these general steps. Specific machine designs may vary, so refer to your washing machine's primary service manual if available.

Ukulungiselela:
- Disconnect the washing machine from the main power supply.
- Vala amanzi emshinini.
- Pull the washing machine away from the wall to access the rear panel.
Finyelela Ibhande:
- Locate and remove the screws securing the rear access panel of the washing machine.
- Carefully remove the panel to expose the motor, drum pulley, and the old belt (if still present).
Susa Ibhande Elidala:
- If the old belt is still partially attached, carefully pry it off the motor pulley and then the larger drum pulley. Note its orientation.
Faka Ibhande Elisha:
- First, loop the new Candy 92130871 belt around the smaller motor pulley.
- Next, partially loop the belt around the larger drum pulley.
- While holding the belt firmly on the motor pulley and partially on the drum pulley, slowly rotate the drum pulley by hand. The belt should gradually roll onto the drum pulley until it is fully seated. Ensure the ribbed side of the belt (if applicable) faces the pulleys correctly.
- Check that the belt is centered on both pulleys and has proper tension. It should be snug but allow for a small amount of flex.
Phinda uhlanganise:
- Replace the rear access panel and secure it with the screws.
- Push the washing machine back into its position.
- Reconnect the power supply and water supply.
Isivivinyo:
- Run a short, empty wash cycle to ensure the belt operates smoothly and quietly.

6. Isondlo

Regular inspection of the drive belt can help prevent future issues and extend the life of your washing machine.

Ukuhlolwa Kwezikhathi: Every 1-2 years, or if you notice unusual noises or performance issues, inspect the belt for signs of wear, cracking, fraying, or stretching.
Ukushuba Okufanelekile: Ensure the belt maintains proper tension. A loose belt can slip, causing the drum to not spin or spin intermittently. An overly tight belt can put undue stress on the motor and drum bearings.
Inhlanzeko: Keep the area around the motor and pulleys free from lint, debris, and moisture, which can affect belt performance and lifespan.

7. Ukuxazulula izinkinga

Inkinga	Imbangela Engenzeka	Isixazululo
Drum not spinning or spinning slowly	Broken, stretched, or slipped drive belt.	Inspect the belt. Replace if broken or severely worn. Re-seat if slipped.
Loud squealing or grinding noise during spin cycle	Worn or misaligned drive belt.	Check belt for wear and proper alignment on pulleys. Replace if worn.
Iphunga elivuthayo	Belt slipping due to improper tension or excessive load.	Check belt tension and ensure it's not overloaded. Replace if damaged from slipping.

If troubleshooting steps do not resolve the issue, it is recommended to contact a qualified appliance technician.

8. Imininingwane

Ibhrendi: Uswidi
Inombolo Yemodeli: 92130871
Uhlobo Lomkhiqizo: Washing Machine Replacement Belt
Amadivayisi Ahambisanayo: Umshini Wokuwasha
Ubukhulu bephakheji: 30 x 20 x 3 cm (cishe)
Isisindo Somkhiqizo: 100 g (cishe)

9. Iwaranti kanye Nokusekela

For information regarding warranty coverage, technical support, or to purchase additional parts, please refer to the official Candy webisayithi noma uxhumane nomnyango wabo wesevisi yamakhasimende. Gcina irisidi lakho lokuthenga njengobufakazi bokuthenga.

Official Candy Webindawo: www.candy-group.com

Uswidi 92130871