RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Umkhiqizo Uphelileview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Izici Eziyinhloko:

• Amandla: 39-watt LED
• Izinga lokushisa lombala: 5100K Okumhlophe Okupholile
• Ubude bempilo: 100,000 hours based on LM-80 tests
• Ama-LED: Three multi-chip 13-watt high-performance LEDs
• Izinketho: NEMA type 7H x 6V with Air-flow technology heatsink
• I-Reflector: Semi-specular anodized aluminum
• Ama-Gaskets: I-silicone enezinga eliphezulu lokushisa
• Qeda: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Ulwazi Lokuphepha

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Ukuphepha Kagesi: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Ukubeka phansi: The fixture must be properly grounded to prevent potential electric shock.
• Ukukhweza: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Izinga Lokushisa Lokusebenza: Do not operate the fixture outside its specified temperature range.
• Ama-LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Ukufakwa

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Amathuluzi adingekayo:

• I-Screwdriver (Phillips kanye ne-flathead)
• Ama-stripper ezintambo
• Udlawu
• Drill (if mounting surface requires pilot holes)
• Isikrini esilungisekayo

Izinketho zokukhweza:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Umfanekiso 2: Eksample of a Slipfitter Mount (optional accessory)

Izinyathelo zokufaka:

1. Nqamula Amandla: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltagumhloli.
2. Lungiselela Ukukhweza Indawo: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Uxhumano Lwezintambo:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. I-Mount Fixture: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Lungisa Inhloso: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Buyisela Amandla: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Ukusebenza

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Ukusebenza Okujwayelekile:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Umfanekiso 3: Eksample of a Photocell (optional accessory)

5. Isondlo

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Ukuhlanza:

• Ingaphandle: Hlanza ingaphandle lezinto ngezikhathi ezithile nge-soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Ilensi: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Ukuhlola:

• Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Ukuxazulula izinkinga

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Imininingwane

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Iwaranti kanye Nokusekela

Iwaranti yomkhiqizi:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Iwaranti yomkhiqizi yonyaka ongu-1 kusukela ngedethi yokuthenga. Lesi siqinisekiso simboza amaphutha ezintweni zokwakha kanye nokusebenza ngaphansi kokusetshenziswa okujwayelekile kanye nesevisi.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Ukwesekwa Kwamakhasimende:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webindawo yemininingwane yokuxhumana yamanje.