Progress Lighting 2-Light Flush Mount Ceiling Light Fixture User Manual

1. Isingeniso

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting 2-Light Flush Mount Ceiling Light Fixture, Model P3925-09. This fixture is designed to provide ambient illumination in various interior spaces such as kitchens, hallways, bedrooms, and living rooms. Please read all instructions carefully before beginning installation.

Figure 1: Progress Lighting 2-Light Flush Mount Ceiling Light Fixture (Model P3925-09)

2. Ulwazi Olubalulekile Lokuphepha

Ukuze unciphise ingozi yomlilo, ukushaqeka ngogesi, noma ukulimala komuntu, landela njalo lezi zinyathelo zokuphepha eziyisisekelo:

• ISEXWAYISO: Turn off electrical power at the circuit breaker or fuse box before installing or servicing the fixture.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• Lesi sici senzelwe ukusetshenziswa endlini kuphela.
• Do not install this fixture in wet locations. It is cCSAus damp-location listed, suitable for damp environments like bathrooms or covered porches, but not direct water exposure.
• Always use bulbs of the correct wattage and type as specified in the product specifications.
• Phatha izingxenye zengilazi ngokucophelela ukuze uvimbele ukuphuka.
• Isiphakamiso 65 Isexwayiso: Lo mkhiqizo ungaqukatha amakhemikhali aziwa yi-State of California ukudala umdlavuza nokukhubazeka kokuzalwa noma enye ingozi yokuzala.

3. Okuqukethwe Kwephakheji

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

Figure 2: Diagram of fixture components and assembly steps.

Izingxenye ezifakiwe:

• Mounting strap for outlet box
• Mounting hardware (screws, wire nuts)
• Fixture body with pre-wired electrical leads
• Alabaster glass dome shade
• Decorative finial
• Ishidi lemiyalelo yokufaka

Qaphela: Izibani ezikhanyayo azifakiwe futhi kufanele zithengwe ngokuhlukana.

4. Imiyalelo yokufaka

Follow these steps to install your ceiling light fixture. It is recommended to have a second person assist during installation to ensure safety and ease of handling.

1. Vala Amandla: Before starting, ensure the electrical power to the junction box is turned off at the main circuit breaker or fuse box.
2. Lungiselela Ukukhweza: Attach the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is securely fastened.
3. Uxhumano Lwezintambo: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts.
   • Connect the black wire from the fixture to the black (hot) wire from the outlet box.
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
   • Connect the copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
   Qinisekisa ukuthi konke ukuxhumana kuvikelekile.
4. I-Mount Fixture Body: Carefully tuck the wires into the outlet box. Align the fixture body with the mounting strap and secure it using the provided screws.
5. Faka Amalambu Okukhanya: Screw two 75-watt maximum, medium base (E26) bulbs or LED equivalents (sold separately) into the sockets.
6. Namathisela Umthunzi Wengilazi: Place the alabaster glass dome shade onto the fixture body. Secure it with the decorative finial by screwing it onto the threaded rod at the bottom of the fixture. Do not overtighten.
7. Buyisela Amandla: Once installation is complete, turn the electrical power back on at the circuit breaker or fuse box.

Figure 3: Detailed installation sheet for Model P3925-09.

5. Operating Your Light Fixture

This fixture operates like a standard ceiling light. Once installed and power is restored, it can be controlled via a wall switch (not included).

• Khanyisa cisha: Sebenzisa inkinobho yodonga exhunyiwe ukuvula noma ukuvala isibani.
• Ukucwilisa: If using dimmable bulbs and a compatible dimmer switch (both sold separately), you can adjust the light intensity to create your desired ambiance.

6. Isondlo

Ukunakekelwa okuvamile kuzosiza ukulondoloza ukubukeka nokusebenza kwesibani sakho.

• Ukuhlanza: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or pads, as they may damage the finish.
• Ukushintshwa kwe-Bulb:
  1. Turn off the power to the fixture at the circuit breaker.
  2. Carefully unscrew the decorative finial at the bottom of the glass shade.
  3. Remove the glass shade.
  4. Unscrew the old bulbs and replace them with new 75-watt maximum, medium base (E26) bulbs or LED equivalents.
  5. Reattach the glass shade and secure it with the decorative finial.
  6. Buyisela amandla endaweni.

7. Ukuxazulula izinkinga

If your fixture is not operating correctly, refer to the following table for common issues and solutions:

8. Imininingwane Yomkhiqizo

Figure 4: Dimensional drawing of the fixture, showing 13-1/4" diameter and 5-7/8" height.

Umfanekiso 5: Vala-up view of the brushed nickel finial at the base of the glass shade.

Umfanekiso 6: Vala-up view of the brushed nickel rim of the fixture.

9. Ulwazi Lwewaranti

This Progress Lighting fixture is backed by a Iwaranti ekhawulelwe yeminyaka engu-1. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer support.

10. Ukwesekwa Kwamakhasimende

For further assistance, technical support, or to inquire about replacement parts, please visit the official Progress Lighting store or contact their customer service department.

Progress Lighting Store: Vakashela Isitolo