I-WMF 06.5513.6040

WMF Pepper Mill Instruction Manual

Imodeli: 06.5513.6040

1. Isingeniso

Thank you for choosing the WMF Pepper Mill. This manual provides essential information for the safe and efficient use of your new pepper mill. Please read these instructions carefully before first use and keep them for future reference. This product is designed for grinding fresh peppercorns.

2. Iziyalezo Zokuphepha

  • Always handle the mill with care.
  • Gcina endaweni lapho izingane zingafinyeleleki khona.
  • This product is not suitable for grinding salt or other spices unless specified.
  • Do not immerse the grinding mechanism in water.
  • Isexwayiso: Lo mkhiqizo akuphephile umshini wokuwasha izitsha. Refer to the cleaning instructions.

3. Uhlu Lwezingxenye

Your WMF Pepper Mill consists of the following main components:

  • Ikhephu ephezulu: Stainless steel cap covering the grinding mechanism.
  • Indlela Yokugaya: High-quality ceramic grinder for adjustable fineness.
  • Umzimba: Combination of Cromargan 18/10 stainless steel and high-quality acrylic glass for the spice chamber.
  • Isisekelo: Stainless steel base.
WMF Pepper Mill with peppercorns inside

Image 1: The WMF Pepper Mill, showcasing its stainless steel and acrylic glass construction, filled with colorful peppercorns.

4. Setha

  1. Ukukhulula: Carefully remove all packaging materials and inspect the mill for any damage.
  2. Ukugcwalisa Isigayo:
    • To fill, gently pull the top stainless steel cap upwards to separate it from the acrylic glass body.
    • Fill the acrylic glass chamber with whole peppercorns. Do not overfill.
    • Align the top cap with the body and push it down firmly until it is securely in place. Ensure the airtight lid is properly sealed to preserve flavor.

5. Iziqondiso Zokusebenza

  1. Ukugaya: Hold the mill firmly with one hand. With the other hand, twist the top cap clockwise to activate the grinding mechanism.
  2. Adjusting Grind Fineness: The WMF Pepper Mill features a fully adjustable ceramic grinding mechanism. To adjust the fineness:
    • Turn the knob located at the bottom of the grinding mechanism.
    • Turn clockwise for a finer grind.
    • Turn counter-clockwise for a coarser grind.
    • Test the grind on a surface until the desired fineness is achieved.
Ground red pepper flakes being dispensed from a WMF mill

Image 2: The WMF Pepper Mill dispensing freshly ground red pepper flakes, demonstrating its grinding capability.

6. Ukunakekela kanye Nokuhlanza

Proper care will ensure the longevity and performance of your WMF Pepper Mill.

  • Insipho yokugeza izandla kuphela: The pepper mill is akuphephile umshini wokuwasha izitsha.
  • Ukuhlanza Ingaphandle: Wipe the stainless steel and acrylic surfaces with a damp cloth and mild detergent. Dry thoroughly immediately.
  • Cleaning the Grinding Mechanism: For best results, occasionally grind a small amount of coarse salt to clean the ceramic mechanism. Do not use water directly on the mechanism. A small brush can be used to remove any residue.
  • Isitoreji: Store in a dry place. The airtight lid helps preserve the freshness and aroma of the peppercorns and prevents spills.

7. Ukuxazulula izinkinga

  • Mill not grinding: Check if the spice chamber is empty. Refill with peppercorns. Ensure the top cap is securely attached.
  • Ukugaya okungaguquki: Adjust the grind fineness setting. Ensure the peppercorns are dry and free from moisture.
  • Difficulty turning: The grinding mechanism might be clogged. Try cleaning it by grinding coarse salt or using a small brush.

8. Imininingwane

Inombolo Yemodeli06.5513.6040
IbhrendiI-WMF
OkubalulekileCromargan 18/10 Stainless Steel, Acrylic Glass
Ubukhulu (L x W x H)22.8 x 5.5 x 18 cm
Isisindoawu 285g
Imodi yokusebenzaImanuwali
Umshini wokuwasha izitsha uphephileCha
Ukusetshenziswa OkunconyiweFresh Pepper Grinding

9. Iwaranti kanye Nokusekela

WMF products are known for their durability and quality. This pepper mill is made from long-lasting stainless steel. Spare parts for this model are available in the EU for up to 10 years.

For any questions, technical assistance, or warranty claims, please contact WMF customer support through their official website or the retailer where the product was purchased. Please have your model number (06.5513.6040) available when contacting support.

© 2023 WMF. Wonke Amalungelo Agodliwe.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.