Progress Lighting P5607-31 Traditional Outdoor Wall Lantern User Manual

1. Ulwazi Olubalulekile Lokuphepha

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.

• ISEXWAYISO: Ingozi yokushaqeka ngogesi. Nqamula ugesi ku-circuit breaker noma ebhokisini le-fuse ngaphambi kokufakwa noma ukulungiswa.
• Konke ukuxhumeka kukagesi kumele kuhambisane nemithetho yendawo, imithetho, noma i-National Electric Code (NEC). Xhumana nochwepheshe kagesi oqeqeshiwe uma ungajwayelene nokuxhumeka okufanele kwezintambo zikagesi.
• Use only UL/cUL listed wire connectors.
• Lo mkhiqizo ungase uqukathe amakhemikhali aziwa yiSifundazwe saseCalifornia ukuthi abangela umdlavuza, ukukhubazeka kokuzalwa, noma okunye ukulimala kokuzala (Isixwayiso seSiphakamiso 65). Geza izandla ngemva kokuphatha.

2. Umkhiqizo Uphelileview

The Progress Lighting P5607-31 is a traditional 1-light outdoor wall lantern featuring clear flat glass and a textured black finish. It is designed for outdoor use, providing illumination for porches, patios, and other exterior areas.

Umfanekiso 2.1: Ngaphambili view of the Progress Lighting P5607-31 outdoor wall lantern in textured black with clear glass.

Umfanekiso 2.2: Line drawing illustrating the design of the P5607-31 outdoor wall lantern.

3. Ukusetha nokufakwa

3.1 Okuqukethwe Kwephakheji

Verify that all components are present before beginning installation. The package typically includes the fixture, mounting hardware, and an installation sheet.

3.2 Ukufaka Ngaphambili

1. Cima ugesi ku-main circuit breaker noma ebhokisini le-fuse.
2. Carefully unpack the fixture and components.

3.3 Ukufaka i-Fixture

This fixture is designed for wall mounting. Ensure the mounting surface is secure and can support the weight of the fixture.

1. Namathisela ubakaki wokukhweza ebhokisini lokuhlangana usebenzisa izikulufu ezinikeziwe.
2. Ensure the bracket is level and securely fastened.

3.4 Ukuxhunywa kukagesi

Connect the fixture wires to the house wires according to the following:

• Xhuma ucingo olumnyama oluvela ku-fixture kuya kucingo olumnyama (olushisayo) oluvela ebhokisini lokuxhumanisa.
• Xhuma intambo emhlophe ukusuka ku-fixture uye ocingweni olumhlophe (emaphakathi) ukusuka ebhokisini lokuhlangana.
• Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the junction box.
• Secure all connections with UL/cUL listed wire connectors.

3.5 Securing the Fixture

1. Faka ngokucophelela zonke izintambo ebhokisini lokuhlangana.
2. Align the fixture with the mounting bracket and secure it using the provided screws or nuts.

3.6 Ukufakwa Kwebhalbhu

This fixture uses one (1) 100-Watt maximum, medium base (E26) bulb. An A19 shape bulb is recommended for optimal appearance with the clear glass.

Umfanekiso 3.1: Bulb information indicating an E26 (Medium Base) bulb and recommending an A19 bulb shape for this fixture.

1. Screw the bulb into the socket until snug. Do not overtighten.
2. This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs.

3.7 Ukubekwa Okunconyiwe

For aesthetic balance, wall lanterns are often sized to be approximately 1/4 the height of the door they flank.

Umfanekiso 3.2: Example of wall lantern height recommendation: 1/4 of the door height. For a 96-inch door, a 24-inch fixture is suggested.

Umfanekiso 3.3: Illustration of outdoor wall lantern placement on a house, demonstrating appropriate sizing and spacing for garage and entryways.

4. Ukusebenza

Once installed and power is restored, the fixture operates by a standard wall switch. If a compatible dimmer switch and dimmable bulb are used, the light output can be adjusted.

5. Isondlo

5.1 Ukuhlanza

Ukuze uhlanze isitsha, cisha ugesi bese usula nge-soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.

5.2 Ukushintsha Amalambu

Before replacing the bulb, ensure the power is turned off at the circuit breaker. Allow the bulb to cool completely before touching. Replace with a new 100-Watt maximum, E26 base bulb.

6. Ukuxazulula izinkinga

• Ukukhanya akuvuli:
  • Check that the power is turned on at the circuit breaker.
  • Qinisekisa ukuthi i-bulb iboshwe kahle kusokhethi futhi ayishi.
  • Qinisekisa ukuthi zonke izixhumo zikagesi zivikelekile.
  • Inspect for any defective electrical components or wiring.
• Fuse blows or circuit breaker trips:
  • Check for crossed wires or short circuits.
  • Qinisekisa ukuthi i-bulb wattage does not exceed the fixture's maximum rating (100W).

7. Imininingwane

Umfanekiso 7.1: Detailed dimensions of the P5607-31 fixture, showing a width of 4-9/16 inches and a height of 8-5/8 inches.

8. Ulwazi Lwewaranti

This Progress Lighting product is covered by a Iwaranti enomkhawulo yeminyaka emi-1. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific details regarding warranty claims or service, please refer to the original purchase documentation or contact Progress Lighting customer service.

9. Ukusekela

For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service. Contact information can typically be found on the manufacturer's official webindawo noma emaphaketheni omkhiqizo.