Uyifunda Kanjani Ilebula Yakho

Ilebula ngalinye liza nenombolo yemodeli egcwele, inombolo yengxenye, kanye nenombolo yomkhiqizo. Inombolo yemodeli ye-MNU-IS izobukeka kanje:
SAMPLE: MNU-IS-6424-C6A
Inombolo yemodeli ihambisana nazo zonke izinketho ezilungisekayo futhi ikutshela kahle lokho onakho.
Qhathanisa inombolo yemodeli nezinketho ezikumininingwaneni ukuze uhlonze ukumisa kwakho ngqo.
Ungaphinda usishayele ngemodeli, ingxenye, noma inombolo ye-serial futhi singakusiza.
Ilebula futhi ihlanganisa i-pinout, njengoba kwenza lo mhlahlandlela wokufaka.

Iwaranti

Lo mkhiqizo umbozwa iwaranti ye-APG yokuthi ungabi nasici ezintweni ezibonakalayo kanye nokusebenza ngaphansi kokusetshenziswa okujwayelekile kanye nesevisi yomkhiqizo izinyanga ezingama-24. Ukuze uthole incazelo egcwele yewaranti yethu, sicela uvakashele www.apgsensors.com/resources/warranty-certifications/warranty-returns. Xhumana Nosekelo Lwezobuchwepheshe ukuze uthole Ukugunyazwa Kwezinto Zokubuyisela Ngaphambi Kokuthumela umkhiqizo wakho.

Amanothi okufakwa ngokomzimba kanye neziyalezo zokukhweza

Imibandela Ethize Yokusebenzisa

• Ngaphansi kwezimo ezithile ezimbi kakhulu, izingxenye ezingezona ezensimbi ezifakwe endaweni evalekile yalesi sisetshenziswa zingase zikhiqize ileveli ekwazi ukuvutha yokushaja i-electrostatic. Ngakho-ke okokusebenza akufanele kufakwe endaweni lapho izimo zangaphandle zivumela ukwakhiwa kweshaje ye-electrostatic kulezo zindawo. Ngaphezu kwalokho, okokusebenza kuzohlanzwa kuphela ngesikhangisoamp indwangu.

I-MNU-IS kufanele ifakwe endaweni—ngaphakathi noma ngaphandle—ehlangabezana nalezi zimo ezilandelayo:

• Izinga lokushisa le-ambient liphakathi kuka--30°C no-60°C (-22°F ukuya ku-+140°F) ngaphandle uma kuboniswe ngenye indlela.
• Awekho amakhemikhali alimaza i-PVDF noma i-PBT.
• Ample ndawo yokugcinwa nokuhlolwa.
• Inzwa itholakala kude nezinkambu ezinamandla kazibuthe kagesi, njengalezo ezikhiqizwa amamotho, ama-transformer, ama-solenoid valves, njll.
• Inzwa ayivezwa ukudlidliza okweqile.
• Inzwa ivikelwe elangeni eliqondile noma emazingeni okushisa ahlukile kunamazinga okushisa aphakathi kwenzwa nokuhlosiwe. Lokhu kuyadingeka ukuze isinxephezelo sezinga lokushisa sisebenze ngendlela efanele.
• Okokusebenza kuzofakwa endaweni lapho izimo zangaphandle zingahambisani nokwakhiwa kweshaje ye-electrostatic kwinzwa. Izinto ezisetshenziswayo zizohlanzwa kuphela ngesikhangisoamp indwangu.
  KUBALULEKILE: Bheka isigaba 10 somdwebo wokufaka onobungozi

Ubukhulu

• Inketho Yezindlu 2
  
• Inketho Yezindlu 4
  

Ukukhweza inzwa yakho ye-ultrasonic ye-MNU-IS kulula uma ulandela izinyathelo ezimbalwa ezilula:

• Ungalokothi uqinise kakhulu inzwa.
• Hlala ugoqa inzwa yakho ngesandla ukuze ugweme ukuhlanganisa imicu. Ukuhluleka kwentambo kungaba yinkinga uma ulimaza izintambo ngokuziqinisa kakhulu noma ngokuwela imicu.
• Khipha inzwa yakho ye-MNU-IS ukuze ibe nendlela yomsindo ecacile, eqondile eya endaweni egadwayo. Inzwa yakho kufanele ibekwe kude nethangi noma izindonga zomkhumbi nama-inlets. (Bheka umfanekiso 4.1)
• Indlela yomsindo kufanele ingabi nezithiyo futhi ivuleke ngangokunokwenzeka kuphethini ye-axis off off 9°.
• Uma usebenzisa ipayipi lokumisa, sicela ubone umhlahlandlela wethu wokumisa amapayipi kwethi yethu webindawo: http://www.apgsensors.com/about-us/blog/how-to-install-a-stand-pipe.

Ulwazi Lwezintambo

KUBALULEKILE: Indawo yekesi ye(izi)viyo ze-IS kumele ixhunywe endaweni yokusebenza ngasohlangothini lokunikezela.

KUBALULEKILE: Imishini ethile ye-Modbus yomkhiqizi isebenzisa izikhonkwane ezihlehlisiwe ze-TX+/TX-. Uma uxhuma kunoma iyiphi into eyi-Modbus, ukubuyisela emuva ukuxhumana kungase kudingeke uma inzwa ingaxhumani nesilawuli.

Qaphela: Lapho uxhuma izinzwa ze-MNU-IS kusistimu yakho, ukuhlehlisa ukuxhumeka kuka-A no-B kungase kudingeke uma izinzwa zingaxhumani nedivayisi Yeseva ye-Modbus.

120 Ω inqamula i-resistor kuwo wonke amatheminali A & B wenzwa yokugcina noma kuphela, uma kudingeka.
Okokufakwa ngaphandle kwezithiyo ze-IS kuphela.

I-Modbus System Wiring 

Qaphela: Ukunikezwa kwamandla okuzimele kwe-+8-24 Vdc kuyadingeka uma usebenzisa i-RST-6001 Modbus Controller. I-RST-6001 ingahlinzeka kuphela nge-±5 Vdc, hhayi i-+8-24 Vdc edingwa i-MNU-IS.

120 Ω inqamula i-resistor kuwo wonke amatheminali A & B wenzwa yokugcina noma kuphela, uma kudingeka. Okokufakwa ngaphandle kwezithiyo ze-IS kuphela.

I-Modbus System Wiring ene-RST-6001

Ukunakekelwa Okujwayelekile

Inzwa yakho ye-ultrasonic ye-MNU-IS isesimweni esiphansi kakhulu futhi izodinga ukunakekelwa okuncane inqobo nje uma ifakwe ngendlela efanele. Nokho, ngokuvamile, kufanele:

• Gwema izinhlelo zokusebenza lapho inzwa ayizange yakhelwe khona, njengamazinga okushisa adlulele, ukuthintana namakhemikhali egqwalayo angahambisani nentuthu, noma ezinye izindawo ezilimazayo.
• Vikela emanzini noma ekunqwabeleni kweqhwa ebusweni benzwa.
• Hlola uchungechunge noma nini lapho ususa inzwa emsebenzini noma ushintsha indawo yayo.

QAPHELA: Bona Imanuwali yakho Yomsebenzisi ye-MNU-IS ukuze uthole imiyalelo yokuhlela ye-Modbus namathiphu okuxazulula inkinga.

INGOZI: Unganqamuli okokusebenza okufakwe ezindaweni eziyingozi ngaphandle uma ugesi ucishiwe noma indawo yaziwa ngokuthi ayinayo ingozi.

Umdwebo Wokufaka Okuyingozi

I-Modbus System Wiring ene-RST-5003 kanye Nokunikezwa kwamandla Okuzimele

I-Modbus System Wiring ene-RST-5003 kanye ne-Power Over Ethernet (POE) noma i-VDC

Ulwazi Lokulungisa

Uma inzwa yakho ye-MNU-IS idinga ukulungiswa, xhumana nathi nge-imeyili, ucingo, noma ingxoxo ye-inthanethi kwethi webindawo. Sizokunikeza inombolo ye-RMA eneziyalezo.

• Ucingo: 888-525-7300
• I-imeyili: sales@apgsensors.com
• Ingxoxo eku-inthanethi at www.apgsensors.com

Imiyalo Yokususa

• Qinisekisa ukuthi amandla enzwa avaliwe.
• Nqamula ikhebula kunzwa.
• Khipha inzwa bese uyigcina endaweni eyomile, ezingeni lokushisa eliphakathi kuka -30°C no-60°C (-22°Fto 140°F), ngaphandle kwalapho kucaciswe ngenye indlela.
• Uma ngabe inzwa ifakwe endaweni eyingozi, qinisekisa ukuthi ikhebula ngeke libe namandla ngenkathi inzwa inqanyulwa.

QuickMode Notes

Ukuze usebenzise ngempumelelo i-QuickMode:

• Qinisekisa ukuthi i-Modbus Master yakho imisiwe ukuze ilalele futhi yamukele iphakethe lempendulo ngemva kokuqalisa i-QuickMode.
• Qinisekisa ukuthi izilungiselelo zakho ze-MNU-IS zilungiselelwe ukufakwa (Ukuzwela, Ama-Pulses, Amandla Okushaya, njll).
• Qinisekisa ukuthi i-MNU-IS yakho ilinganiselwe ngebanga.
• Setha ukubambezeleka kwesikhathi osifunayo kokuthi Ukulibaziseka kwe-QuickMode (Ukubamba Irejista 40422).
• Uma zonke ezinye izilungiselelo zimiswe kahle, setha inombolo ye-QuickMode sampLes kufanele ilinganiswe (40421).

Izilungiselelo ezilandelayo zezinzwa ezijwayelekile kufanele zilungiselelwe ukusebenza kwenzwa okuphelele ngaphambi kokuqalisa i-QuickMode ukuze kufundwe okunembile kwe-QuickMode:

• Ibanga eliphezulu (40405)
• I-Pulses (40409), Ukuzwela (Ukubamba Irejista 40408), kanye ne-Pulse Power (40423)

Ukuze uqalise i-QuickMode: 

• Bhala inombolo ye-QuickMode oyifunayoampLes to Holding Register 40421.

Ukuze uphume i-QuickMode (buyela ekusebenzeni kwenzwa evamile): 

• Bhala 0 kurejista yokubamba 40421.

KUBALULEKILE: I-MNU-IS yakho KUMELE ifakwe ngokomdwebo 9005002 (Umdwebo Wokufaka Okuyingozi) ukuze uhlangabezane nezimvume ezisohlwini. Ukufakwa okunephutha kuzosusa zonke izigunyazo zokuphepha nezilinganiso.

Ukwesekwa Kwamakhasimende

I-Automation Products Group, Inc.
1025 W 1700 N Logan, UT 84321
www.apgsensors.com | ifoni: 888-525-7300 | i-imeyili: sales@apgsensors.com