Uchungechunge olukhulu lwe-FDV
Ukuhlinzekwa Kwamandla Ngamunye
Finyelela Izilawuli Zamandla (PTC)
Umhlahlandlela wokufaka

I-Maximal7FDV Finyelela Amandla Izilawuli

Amamodeli afaka phakathi:
Inani eliphakeme kakhulu lama-3FDV
– 12VDC @ 4.6A noma 24VDC @ 5.2A.
– Ishumi nesithupha (16) lePTC elivikelwe imiphumela.
Inani eliphakeme kakhulu lama-5FDV
– 12VDC @ 8.6A.
– Ishumi nesithupha (16) lePTC elivikelwe imiphumela.
Inani eliphakeme kakhulu lama-7FDV
– 24VDC @ 9.2A.
– Ishumi nesithupha (16) lePTC elivikelwe imiphumela.

Umfundisi SFDV031115
Ifaka Inkampani: _______________
Igama Lomeleli Wenkonzo: ________________
Ikheli: ___________________________________
Inombolo yefoni: ___________________________________

I-MaximalFDV Series Iphelileview:

I-Altronix MaximalFDV Access Power/Controllers isabalalisa futhi ishintshe amandla ukuze ifinyelele amasistimu okulawula kanye nezinsiza. Baguqula i-220VAC (ububanzi obusebenzayo 198VAC - 256VAC), okokufaka okungu-50/60Hz kube okokukhiphayo okuyishumi nesithupha (16) okulawulwa ngokuzimela okuvikelwe okungu-12VDC noma okungu-24VDC PTC. Okuphumayo kwenziwa kusebenze usinki wokuqoqa ovulekile noma okokufaka okuvamise ukuvuleka (NO) kwetrigger okomile okusuka Kusistimu Yokulawula Ukufinyelela, Ikhiphedi, Inkinobho Yokusunduza, i-REX PIR, njll. Amayunithi azohambisa amandla kumadivayisi wehadiwe okulawula ukufinyelela okuhlukahlukene okuhlanganisa: Ama-Mag Locks. , Iziteleka zikagesi, Izibambi Zezicabha Zezibuthe, njll. Isixhumi esibonakalayo se-FACP sinika amandla i-Emergency Egress, I-Alarm Monitoring, noma ingase isetshenziselwe ukucupha ezinye izisetshenziswa ezisizayo. Isici sokunqamula i-alamu yomlilo singakhethwa ngasodwa kunoma yikuphi ukuphuma kweshumi nesithupha (16).

Ishadi lokucushwa lochungechunge lwe-MaximalFDV:

Lawa mayunithi afanele amandla: izinzwa, izisetshenziswa ze-electro-mechanical (isb. ukushaywa kweminyango kagesi).

Izici zochungechunge lwe-MaximalFDV:

Amamojula okulawula amandla okufinyelela kwe-ACM8CB:

• Abayishumi nesithupha (16) bacupha ngokuzimela okuphumayo okulawulwayo. Izinketho zokuphumayo:
  a) Ishumi nesithupha (16) Okukhipha amandla ahlungiwe kwe-Fail-Safe.
  b) Ishumi nesithupha (16) Okukhipha amandla ahlungiwe kwe-Fail-Secure.
  c) Noma iyiphi inhlanganisela yalokhu okungenhla.
• Ishumi nesithupha (16) Uhlelo Lokulawula Ukufinyelela lucupha okokufaka. Izinketho zokucupha okokufaka:
  a) Ishumi nesithupha (16) elivamise ukuvula (NO) okokufaka kwe-dry trigger.
  b) Izinto eziyishumi nesithupha (16) zokuqoqa ezivulekile.
  c) Noma iyiphi inhlanganisela yalokhu okungenhla.
• Ishumi nesithupha (16) elihlungiwe i-aux engashintshiwe. ukuphuma kwamandla (okuphumayo kukalwe @ 2.5A).
• Ama-LED abomvu ebhodini le-ACM8CB akhombisa ukuphuma ngakunye kuyacushwa (ukudluliselwa kunikwe amandla).
• Ukunqanyulwa kwe-Alamu Yomlilo (ukuxhuma noma ukungaxhunywanga) kungakhethwa ngakunye kunoma iyiphi noma yonke imiphumela eyishumi nesithupha (16).
  Izinketho zokufaka i-Fire Alarm:
  a) Ivamise ukuvula (NO) noma kuvame ukuvaleka (NC) dry trigger input.
  b) Okokufaka kokuhlehlisa i-polarity kusuka kusekethi yokusayina ye-FACP.
• I-LED eluhlaza kubhodi ye-ACM8CB ikhombisa ukuthi ukunqanyulwa kwe-FACP kubaliwe.
• Ukudluliselwa okukhiphayo kwe-FACP kubonisa ukuthi okokufaka kwe-FACP kuyacushwa (ifomu elithi “C” lokuxhumana likalwe @ 1A/28VDC).
• Ibhodi le-eFlow Power Supply/Charger linikeza amandla afanayo awo womabili amabhodi Okulawula Amandla Okungena kwe-ACM8CB (izintambo zasefekthri) nawo wonke amadivayisi okulawula ukufinyelela axhunyiwe (izintambo zasensimini).
• Amafuse amakhulu ebhodi le-ACM8CB akalwe ku-10A. Ama-PTC okukhiphayo akalwe ku-2.5A.

I-eFlow Power Supply/Ishaja:

• Okokufaka: 220VAC (ububanzi obusebenzayo 198VAC - 256VAC), 50/60Hz.
• Okokukhipha voltage futhi unikeze ireferensi yamanje ku-MaximalFDV uchungechunge lweshadi lokucushwa, pg. 3.
• Okukhiphayo okusizayo kukalwe @ 1A (akushintshiwe).
• I-Overvoltage Ukuvikelwa.
• Ishaja eyakhelwe ngaphakathi ye-asidi yomthofu evaliwe noma amabhethri ohlobo lwejeli.
• Inani eliphakeme kakhulu lama-1.54A.
• Shintsha ngokuzenzakalelayo uye kubhethri elilindile lapho i-AC ihluleka.
  Ukudlulisela emandleni ebhethri alindile kuvele kube khona lapho ngaphandle kokuphazamiseka.
• I-alamu yomlilo egadiwe inqamula (i-latching noma ukungaxhumi) 10K EOL resistor. Isebenza ngesicupha esivamise ukuvula (NO) noma kuvalwe ngokujwayelekile (NC).
• I-AC yehluleka ukugada (ifomu elithi “C” oxhumana nabo).
• Ibhethri liyahluleka nokugadwa ubukhona (ifomu elithi “C” abathintwayo).
• Ukuvala amandla aphansi. Ivala amatheminali okukhiphayo e-DC uma ibhethri linomthamotage yehla ngaphansi kuka-71-73% kumayunithi angu-12V kanye no-70-75% kumayunithi angu-24V (kuye ngokuthi ukunikezwa kwamandla). Ivimbela ukuphuma kwebhethri okujulile.
• Ukuze uthole izilinganiso ze-fuse bheka Ishadi Lokucushwa Lochungechunge lwe-MaximalFDV, pg. 3.
• I-Green AC Power LED ikhombisa i-220VAC ekhona.
• Okokufaka kwe-AC kanye nezinkomba ze-LED ze-DC.
• Isekhethi emfishane nokuvikela ukulayisha ngokweqile.
• Indawo ebiyelwe ithatha amabhethri angafika kwamane (4) 12VDC/12AH.
  Ubukhulu bendawo (H x W x D): 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.8mm).

Imiyalelo yokufaka enkulu ye-FDV:

Izindlela zokufaka izintambo zizohambisana Nekhodi Kagesi Kazwelonke/NFPA 70/ANSI, Ikhodi Kagesi yase-Canadian, Ingxenye I, Ingxenye II kanye nawo wonke amakhodi endawo neziphathimandla ezinegunya. Umkhiqizo uhloselwe ukusetshenziswa endlini kuphela.

Ukuxilongwa kwe-LED ye-Power Supply Board	(ikhasi 6)
Finyelela ekuhloleni kwe-LED yesilawuli samandla	(ikhasi 6)
Umazisi wetheminali Yebhodi Lokuphakela Amandla	(ikhasi 6)
Finyelela Ekuhlonzeni Kwetheminali yesilawuli samandla	(ikhasi 7)
Izicaciso zebhethri zebhodi lokuhlinzeka ngogesi	(ikhasi 7)
Ukuphuma Kwebhodi Lokuhlinzeka Ngamandla VoltagIzilungiselelo	(ikhasi 7)
Finyelela Isilawuli Samandla Esijwayelekile Somdwebo Wohlelo	(ikhasi 8)
Imidwebo ye-FACP/Ongakukhetha Yokunikezela Amandla	(ikhasi 11)

1. Faka iyunithi endaweni oyifunayo. Maka futhi ubhoboze izimbobo odongeni ukuze uhambisane nezimbobo zokhiye ezintathu eziphezulu endaweni ebiyelwe. Faka izixhumi ezintathu eziphezulu nezikulufi odongeni amakhanda e-screw aphumele ngaphandle. Beka izimbobo zokhiye ezingaphezulu kwendawo ebiyelwe phezu kwezikulufu ezintathu ezingenhla, ileveli futhi ivikelekile. Maka indawo yezimbobo ezintathu ezingezansi. Susa indawo ebiyelwe. Geza izimbobo ezingezansi bese ufaka izibophelelo ezintathu. Beka izimbobo zokhiye ezingenhla zesivikelo phezu kwezikulufu ezintathu ezingaphezulu. Faka izikulufu ezintathu ezingezansi futhi uqiniseke ukuthi uziqinisa zonke izikulufu (I-Enclosure Dimensions, pg. 12).
2. Xhuma amandla e-AC angashintshiwe (220VAC 50/60Hz) kumatheminali amakwe okuthi [L, N] (Fig. 3, pg. 9). Ungayisebenzisi itheminali ephawulwe ngokuthi [G]. Sebenzisa i-14 AWG noma enkulu kukho konke ukuxhumana kwamandla. Intambo yaphansi evikelekile iholela ku-earth ground lug.
   Gcina izintambo ezikhawulelwe amandla zihlukene nezintambo ezingenamandla anomkhawulo.
   Kufanele kunikezwe isikhala esincane esingu-0.25”.
   ISEXWAYISO: Ungathinti izingxenye zensimbi eziveziwe. Vala amandla esifunda segatsha ngaphambi kokufaka noma ukusevisa imishini. Azikho izingxenye ezisebenzisekayo zomsebenzisi ngaphakathi. Bheka ukufakwa nokusevisa kubasebenzi besevisi abaqeqeshiwe.
3. Khetha ivolumu oyifunayo ye-DCtage ngokusetha i-SW1 endaweni efanele ekunikezeni amandla kaMaximal3FDV (Umfanekiso 1a, pg. 7). Ukunikezwa kwamandla ka-Maximal5FDV kusethwe kwasefekthri ku-12VDC futhi ukunikezwa kwamandla ka-Maximal7FDV kusethwe kwasefekthri ku-24VDC.
4. Linganisa umthamo wokukhiphayotage yeyunithi ngaphambi kokuxhuma noma imaphi amadivaysi ukuze kuqinisekiswe ukusebenza okufanele. Ivolumu engafanele noma ephezulutage izolimaza lawa madivayisi.
5. Izinketho zokuphumayo (Umdwebo 2, ikhasi 8):
   Iyunithi izohlinzeka ngokuphuma kwamandla ashintshiwe ayishumi nesithupha (16), okuphumayo okuyishumi nesithupha (16) omile kwefomu “C”, noma iyiphi inhlanganisela yakho kokubili amandla ashintshiwe kanye nefomu elithi “C” eliphumayo.
   (a) Imiphumela Yamandla Eshintshiwe Ye-Fail-Safe:
   Ngomsebenzi Wokuhluleka Kokuphepha xhuma okokufaka okuhle (+) kwemishini yokulawula ukufinyelela kutheminali ephawulwe ngokuthi [NC]. Xhuma okokufaka okunegethivu (–) kwamadivayisi okulawula ukufinyelela kutheminali ephawulwe ngokuthi [COM].
   (b) Imiphumela Yamandla Eshintshiwe Ye-Fail-Secure:
   Ngomsebenzi Wokuhluleka Kokuvikela xhuma okokufaka okuhle (+) kwamadivayisi okulawula ukufinyelela kutheminali ephawulwe ngokuthi [NO]. Xhuma okokufaka okunegethivu (–) kwamadivayisi okulawula ukufinyelela kutheminali ephawulwe ngokuthi [COM].
6. I-ACM8CB Auxiliary Power output (ayishintshiwe):
   Xhuma amadivayisi okulawula ukufinyelela adinga amandla angaguquki kumatheminali abhalwe ukuthi [C] phozithivu (+) kanye [COM] negethivu (–). Okukhiphayo kungasetshenziswa ukunikeza amandla okufunda amakhadi, amakhiphedi, njll.
   Imiphumela yokusiza ye-eFlow (ayishintshiwe):
   Ekuxhumekeni kwedivayisi eyisiza lokhu okukhiphayo ngeke kuthinteke Ukunqamula Amandla Aphansi noma Isixhumi Esibonakalayo Somlilo. Xhuma idivayisi kumatheminali amakwe [+ AUX –] (Fig. 3, pg. 9).
7. Izinketho zokucupha okokufaka (Umdwebo 2, ikhasi 8):
   (a) Ngokuvamile Vula inhlamvu yokokufaka engu-[NO]:
   Okokufaka 1-8 kwenziwa kusebenze okokufaka okuvamise ukuvuleka noma okuvuliwe komqoqi wokuqoqa. Xhuma ukuphuma kwephaneli yokulawula ukufinyelela, amakhiphedi, izinkinobho zokucindezela, ama-REX PIR, njll. kumatheminali amakwe okuthi [IN] kanye nokuthi [GND].
   (b) Vula okokufaka Kosinki Wokuqoqa:
   Xhuma iphaneli yokulawula ukufinyelela evulekile yokuqoqa usinki ephozithivu (+) kumatheminali aphawulwe ngokuthi [IN] kanye negethivu (–) kumatheminali abhalwe [GND].
8. Izinketho ze-ACM8CB Fire Alarm Interface (Amakhiwane 5-9, ikhasi 11):
   I-[NC] evamise ukuvala noma i-trigger evamise ukuvula okuthi [NO] kusuka kuphaneli yokulawula i-alamu yomlilo noma okokufaka okubuyisela emuva i-polarity kusuka kumjikelezo wokusayinda we-FACP kuzothinta okuphumayo okukhethiwe.
   Ukuze unike amandla i-FACP Nqamula ukuze uthole okukhiphayo, vala ukushintshwa okuhambisanayo [SW1-SW8] ebhodini ngalinye le-ACM8CB. Ukuze ukhubaze ukunqanyulwa kwe-FACP kokuphumayo, vula amaswishi ahambisanayo [SW1-SW8] ebhodini ngalinye le-ACM8CB.
   (a) Ngokuvamile Vula okuthi [NO] okokufaka:
   Ukuze uthole i-hook-up engaxhunywanga bheka ku-Fig. 6, p. 11. Ukuze uthole i-latching hook-up bhekisela ku-Fig. 7, pg. 11.
   (b) Okokufaka okuvamise ukuvalwa [NC]:
   Ukuze uthole i-hook-up engaxhunywanga bheka ku-Fig. 8, p. 11. Ukuze uthole i-latching hook-up bhekisela ku-Fig. 9, pg. 11.
   (c) I-FACP Signaling Circuit input trigger:
   Xhuma iphozithivu (+) nenegethivu (–) kusukela okukhiphayo kwesekethe ye-FACP kumatheminali amakwe [+ INP –]. Xhuma i-FACP EOL kumatheminali amakwe [+ RET –] (i-polarity ibhekisela esimweni se-alamu). I-Jumper etholakala eduze kwe-TRG LED kufanele isikwe (Fig. 5, pg. 11).
9. I-FACP Yomisa ifomu “C” okukhiphayo (Fig. 2b, pg. 8):
   Oxhumana nabo befomu le-FACP elithi “C” bangasetshenziselwa ukucupha ukubika noma ukusayinda amadivayisi.
   Laba othintana nabo bashintsha kumshini wokufaka i-alamu yomlilo kumabhodi e-ACM8CB.
10. Izixhumanisi Zebhethri Ezilindile (Umfanekiso 3, ikhasi 9):
    Ngezinhlelo zokusebenza Zokulawula Ukufinyelela amabhethri ayakhethwa. Uma amabhethri engasetshenziswa, ukulahlekelwa yi-AC kuzoholela ekulahlekeni kwevolthi yokuphumayotage. Uma kufunwa ukusetshenziswa kwamabhethri alindile, kumele abe yi-lead acid noma uhlobo lwejeli. Xhuma ibhethri kumatheminali amakwe [- BAT +] (Fig. 3, pg. 9). Sebenzisa amabhethri amabili (2) 12VDC axhunywe ochungechungeni lokusebenza kwe-24VDC (kufakwe imithombe yebhethri). Sebenzisa amabhethri – Casil CL1270 (12V/7AH), CL12120 (12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) amabhethri noma amabhethri aqashelwa yi-UL BAZR2 kanye ne-BAZR8 esilinganiso esifanele.
11. Ibhethri kanye nemiphumela yokugadwa kwe-AC (Fig. 3, pg. 9):
    Kudingeka ukuxhuma idivayisi yokubika inkinga yokugada emiphumeleni ephawulwe ngokuthi [AC Fail, BAT Fail] kokuphumayo kokudluliswa kokugada okumakwe [NC, C, NO] kumadivayisi afanelekile esaziso esibonakalayo.
    Sebenzisa ama-22 AWG ukuya ku-18 AWG ekuhlulekeni kwe-AC & nokubika okuphansi/ayikho ibhethri.
12. Ukuze ubambezele ukubika kwe-AC amahora angu-2., setha ukushintsha kwe-DIP [Ukubambezeleka kwe-AC] ku-OFF (Umfanekiso 3, ikhasi 9).
    Ukuze ubambezele ukubika kwe-AC iminithi elingu-1, setha ukushintsha kwe-DIP [Ukubambezeleka kwe-AC] ku-ON isikhundla (Fig. 3, pg. 9).
13. Ukunqamula I-alamu Yomlilo (Umdwebo 3, ikhasi 9):
    Ukuze unike amandla i-Alamu Yomlilo Nqamula setha inkinobho ye-DIP [Vala shaqa] ibe IVULIWE indawo.
    Ukuze ukhubaze i-alamu yomlilo Nqamula setha inkinobho ye-DIP [Vala shaqa] ibe yindawo YOKUVALA.
14. Ukufakwa kwe-tamper switch (Fig. 3b, p. 9):
    I-Mount UL Ifakwe ohlwini lwe-tamper switch (i-Altronix Model TS112 noma okulinganayo) phezulu kwendawo ebiyelwe. Shelelezisa i-tamper shintsha ubakaki onqenqemeni lwendawo ebiyelwe cishe u-2” ukusuka kwesokudla (Fig. 3b, pg. 9).
    Xhuma tampshintsha izintambo kokokufaka kwe-Access Control Panel noma idivayisi efanele yokubika esohlwini lwe-UL. Ukuze wenze kusebenze isignali ye-alamu, vula umnyango wendawo ebiyelwe.
15. Okokufaka okuningi kwamandla kagesi (Umdwebo 2, ikhasi 8):
    Uma usebenzisa amandla angaphandle angeziwe, ama-jumpers J1 kanye ne-J2 atholakala ebhodini le-ACM8 elihambisanayo kufanele asikwe (Fig. 2c, 2d, pg. 8). Xhuma amandla okulawula ukungena angaphandle kumatheminali aphawulwe ngokuthi [– Control +] (Lawa matheminali ahambisana namatheminali [– Amandla +]). Uma usebenzisa izinsiza zamandla e-DC, kufanele kuqashelwe i-polarity. Uma usebenzisa izinsiza zamandla e-AC, i-polarity ayidingi ukubonwa.
    (Fig. 2d, pg. 8) Konke ukuxhunywa kwezintambo zenkambu kufanele kwenziwe kusetshenziswa igeji efanelekile ye-CM noma i-FPL jacketed wire noma into efanayo (Fig. 4a, pg. 10).

Ukunakekela:

Ukunakekela: Iyunithi kufanele ihlolwe okungenani kanye ngonyaka ukuze isebenze ngendlela efanele ngale ndlela elandelayo:
Ukugada kwe-FACP: Ukuqinisekisa ukuxhumeka okufanele nokusebenza kwe-hookup yokunqamula I-Alamu Yomlilo, sicela ulandele inqubo efanele ngezansi: Okokufaka Okujwayelekile Okuvulayo: Ukubeka okufushane phakathi kwamatheminali aphawulwe ngokuthi [T] kanye nokuthi [+ INP] kuzocupha Ukunqamula I-alamu Yomlilo. Susa okufushane ukuze usethe kabusha.
Okokufaka Okuvamise Ukuvaleka: Ukukhipha intambo kutheminali ephawulwe ngokuthi [INP –] kuzocupha Ukunqamula I-alamu Yomlilo. Shintsha intambo uye kutheminali ephawulwe ngokuthi [INP –] ukuze isethwe kabusha.
Okokufaka Kwesekethe Yesiginali ye-FACP: Kuyadingeka ukuze ucuphe Uhlelo Lwe-alamu Yomlilo. Kuzo zonke lezi zimo ezingenhla i-TRG LED eluhlaza yama-ACM8s izokhanyisa. Yonke imiphumela ekhethelwe Ukunqamula i-Fire Alarm izovula ukukhiya amadivayisi.
Qaphela: Yonke imiphumela [OUT 1 – OUT 8] kufanele ibe sesimweni esijwayelekile (sokungabi namandla) ngaphambi kokuhlolwa. Uma iyunithi ilungiselwe Ukuvula Ngokujwayelekile (Fig. 7, p. 11) noma Ivalwe Ngokujwayelekile (Fig. 9, pg. 11) ukusebenza kokuxhuma kuyadingeka ukusetha kabusha Ukunqamula I-Alamu Yomlilo ngokuvula iswishi yokusetha kabusha Okuvamise Ukuvaleka.
Okukhipha Umqtage Test: Ngaphansi kwezimo ezijwayelekile zokulayisha, i-DC okukhiphayo voltage kufanele ihlolwe ivolumu efaneletage level (bheka Ishadi Lokucupha lochungechunge lwe-MaximalFDV, pg. 3).
Ukuhlolwa Kwebhethri: Ngaphansi kwezimo ezijwayelekile zokulayisha hlola ukuthi ibhethri ishajwe ngokugcwele, hlola ivolumu ecacisiwetage kumatheminali ebhethri nasematheminali ebhodi aphawulwe ngokuthi [+ BAT –] ukuze kuqinisekiswe ukuthi akukho ukunqamuka kwezintambo zokuxhuma ibhethri.
Qaphela: Isilinganiso esiphezulu senkokhelo yamanje ngu-1.54A. Impilo yebhethri elindelwe iminyaka emi-5; kodwa-ke, kunconywa ukushintsha amabhethri phakathi neminyaka emi-4 noma ngaphansi uma kunesidingo.

Ukuxilongwa kwe-LED ye-Power Supply Board:

Okubomvu (DC)	Okuluhlaza (AC/AC1)	Isimo Sokuhlinzeka Ngamandla
ON	ON	Isimo esivamile sokusebenza.
ON	VALIWE	Ukulahleka kwe-AC. Ibhethri elilindile linikeza amandla.
VALIWE	ON	Akukho okukhiphayo kwe-DC.
VALIWE	VALIWE	Ukulahleka kwe-AC. Ibhethri elivuliwe noma alikho. Akukho okukhiphayo kwe-DC.

Okubomvu (Ilulwane)	Isimo Sebhethri
ON	Isimo esivamile sokusebenza.
VALIWE	Ibhethri liyahluleka/ibhethri liphansi.

Ukuhlola i-LED yesilawuli samandla:

I-LED	ON	VALIWE
I-LED 1- LED 8 (Bomvu)	Ukudluliselwa komphumela kunikwe amandla.	Ukudluliselwa komphumela kukhishwe amandla.
I-Trg (Green)	Okokufaka kwe-FACP kucushiwe (isimo se-alamu).	I-FACP evamile (isimo esingesona i-alamu).

Umazisi wetheminali Yebhodi Lokuhlinzeka Ngamandla:

Isendlalelo seTheminali	Umsebenzi/Incazelo
L, N	Xhuma i-220VAC 50/60Hz kulawa matheminali: L ukuya kokushisayo, N kokumaphakathi. Ungayisebenzisi itheminali ebhalwe ukuthi [G]
+ DC -	Imboni exhunywe ebhodini le-ACM8.
Shintshanisa amasheya EOL Kugadiwe	I-Fire Alarm Interface icupha okokufaka okuvela kufushane noma i-FACP. Okokufaka kwe-trigger kungaba ngokujwayelekile evulekile, evamise ukuvalwa kumjikelezo wokuphuma kwe-FACP (Fig. 3, pg. 9).
CHA, I-GND SETHA KABUSHA	I-FACP isixhumi esibonakalayo sokuxhuma noma ukungaxhunywa (Fig. 3, pg. 9).
+ AUX —	Okuphumayo okusizayo kukalwe i-0 1A (ayishintshiwe) (Fig. 3, pg. 9).
I-AC FAIL I-NC, C, NO	Ibonisa ukulahleka kwamandla e-AC, isb. xhuma kudivayisi ezwakalayo noma iphaneli ye-alamu. Ukudlulisa kuvamise ukuba namandla uma amandla e-AC ekhona. Isilinganiso sokuxhumana 1A 0 30VDC (Fig. 3, pg. 9).
I-BAT FAIL I-NC, C, NO	Ibonisa isimo sebhethri eliphansi, isb. xhuma kuphaneli ye-alamu. Ukudluliselwa kuvame ukunikwa amandla lapho amandla e-DC ekhona. Isilinganiso sokuxhumana 1A 0 30VDC. Ibhethri elikhishiwe libikwa emizuzwini emi-5. Ukuxhunywa kabusha kwebhethri kubikwa phakathi kweminithi elingu-1 (Umfanekiso 3, iphe. 9).
+ BAT -	Ukuxhumana kwebhethri okulindile. Inkokhelo enkulu yamanje ngu-1.54A (Fig. 3, pg. 9).

Ubunikazi betheminali yesilawuli samandla:

Isendlalelo seTheminali	Umsebenzi/Incazelo
- Amandla +	I-12VDC noma i-24VDC evela ekunikezeni amandla/ishaja (ifekthri ixhunyiwe). Lawa matheminali ahambisana namatheminali [— Control +].
- Ukulawula +	Lawa matheminali ahambisana namatheminali [— Amandla +]. Lawa matheminali angaxhunywa esilawulweni sokufinyelela sangaphandle ukunikeza amandla amandla okusebenza angawodwa wamadivayisi. Ama-Jumpers J1 kanye ne-J2 kufanele asuswe.
I-TRIGGER INPUT1 - I-INPUT 8 IN, GND	Kusuka kokujwayelekile okuvulayo kanye/noma kokuvula kokufakwa kukasinki weqoqo okuvulekile (isicelo sokuphuma kwezinkinobho, ukuphuma kuma-PIR, njll.)
OPHUMA 1- UMPHUMELA 8 NC, C, NO, COM	I-12VDC kuya ku-24VDC imiphumela elawulwa yi-trigger ilinganiselwe ku-2.5A. I-Maximal3FDV – 10.0-13.2VDC 0 4.6A noma 20.19-26.4VDC 0 5.2A. I-Maximal5FDV – 10.03-13.2VDC 0 8.6A. I-Maximal7FDV – 20.17-26.4VDC 0 9.2A. I-Fail-Safe [i-NC positive (+) & ne-COM Negative (—)], I-Fail-Secure [AKUKHO okuhle (+) & I-COM Negative (—)], I-axiliary output [C positive (+) & COM Negative (—)]. Uma usebenzisa i-AC power supply polarity ayidingi ukubonwa. Oxhumana nabo baboniswe esimweni esingacushiwe.
I-FACP INTERFACE T, + INPUT —	I-Fire Alarm Interface icupha okokufaka okuvela ku-FACP. Okokufaka kwe-trigger kungavulwa ngokujwayelekile, kuvame ukuvalwa kusukela ekuphumeni kwesekethe yokusayina ye-FACP (Fig. 5-9, pg. 11).
I-FACP INTERFACE I-NC, C, NO	Othintana naye wefomu elithi “C” ukale ku-1A 28VDC ngokubika nge-alamu.

Imininingwane Yebhethri Yebhodi Lokuhlinzeka Ngamandla:

Ibhethri	Inani eliphakeme kakhulu lama-3FDV	Inani eliphakeme kakhulu lama-5FDV	Inani eliphakeme kakhulu lama-7FDV
7AH	10 Amaminithi./6A	5 Amaminithi./10A	5 Amaminithi./10A
12AH	30 Amaminithi./6A	30 Amaminithi./10A	30 Amaminithi./10A
40AH	Ngaphezu kwamahora ama-4/6A	Ngaphezu kwamahora ama-2/10A	Ngaphezu kwamahora ama-2/10A
65AH	Ngaphezu kwamahora ama-4/6A	Ngaphezu kwamahora ama-4/10A	Ngaphezu kwamahora ama-4/10A

Ukuphuma Kwebhodi Lokuhlinzeka Ngamandla Voltage Izilungiselelo:

Finyelela Isilawuli Samandla Esijwayelekile somdwebo wohlelo lokusebenza (ku-ACM8CB ngayinye):

Umfanekiso 3 - Maximal3FDV, Maximal5FDV, kanye ne-Maximal7FDV

ISEXWAYISO: Uma ibhodi yokuphakela amandla isethelwe i-12VDC sebenzisa ibhethri elilodwa kuphela (1) 12VDC elimele.
Gcina izintambo ezikhawulelwe amandla zihlukene kokungewona amandla akhawulelwe.
Sebenzisa isikhala esincane esingu-0.25″.
12AH Amabhethri aphinde ashajwa amabhethri amakhulu kakhulu angangena kule ndawo ebiyelwe. Indawo evalekile yebhethri yangaphandle kufanele isetshenziswe uma kusetshenziswa amabhethri angu-40AH noma angu-65AH.

Izidingo ze-NEC Power-Limited Wiring:

Izintambo ezilinganiselwe zikagesi nezingewona amandla alinganiselwe kufanele zihlale zihlukene kukhabhinethi. Zonke izintambo zesekethe ezinomkhawulo wamandla kufanele zihlale okungenani zingu-0.25” kude nanoma yiziphi izintambo ezingenawo amandla alinganiselwe. Ngaphezu kwalokho, zonke izintambo zesekethe ezilinganiselwe amandla kanye nezintambo ezingenawo amandla alinganiselwe kufanele zingene futhi ziphume kukhabhinethi ngamapayipi ahlukene.
Omunye onjalo examplokhu kuboniswe ngezansi. Uhlelo lwakho lokusebenza oluthile lungase ludinge ukuthi kusetshenziswe izindlela ezahlukene zokukhonkotha komsele. Kungase kusetshenziswe noma yikuphi ukukhishwa komsele. Kuzinhlelo zokusebenza ezikhawulelwe amandla ukusebenzisa ipayipi kungakhethwa. Konke ukuxhunywa kwezintambo zasenkambu kufanele kwenziwe kusetshenziswa igeji efanelekile yocingo oluyi-CM noma i-FPL enejakhethi (noma enye into efanayo).
Indawo engakhethwa yebhethri esohlwini lwe-UL kufanele igxunyekwe eduze nendawo yamandla ngokusebenzisa izindlela zezintambo Zekilasi 1.
Ukufakwa kwe-Canadian sebenzisa izintambo ezivikelekile kukho konke ukuxhumana.
Qaphela: Bheka umdwebo wokubamba izintambo ngezansi ukuze uthole indlela efanele yokufaka intambo enejakhethi ye-CM noma ye-FPL (Fig. 4a).

Imidwebo ye-FACP Hook-Up:

Umdwebo 5 Okokufaka kokuhlehla kwe-polarity okuvela kumjikelezo wokusayinda we-FACP (i-polarity ibalulwe esimweni se-alamu):	Umdwebo 6 Ngokujwayelekile Ukuvulwa: Okokufaka kwe-FACP engaxhunywanga:
Umfanekiso 7 Ngokujwayelekile Vula i-FACP Latching icuphe okokufaka ngokusetha kabusha (Lokhu okukhiphayo akuzange kuhlolwe yi-UL):	Fig. 8 Ngokuvamile Ivalwa: Non-Latching FACP trigger input:
Fig. 9 Ngokuvamile Kuvalwa: Ukuxhuma i-FACP trigger input ngokusetha kabusha (Lokhu okukhiphayo akuzange kuhlolwe yi-UL):

Ubukhulu Bendawo (H x W x D cishe):
26” x 19” x 6.25” (660.4mm x 482.6mm x 158.8mm)

I-Altronix ayinasibopho sanoma yimaphi amaphutha e-typographical.
140 58th Street, Brooklyn, New York 11220 USA | ifoni: 718-567-8181 | ifeksi: 718-567-9056
webindawo: www.altronix.com | i-imeyili: info@altronix.com | Iwaranti yempilo yonke
IIMaximal3FDV/5FDV/7FDV Series
H13U
I-Maximal3FDV/5FDV/7FDV Series (PTC) Umhlahlandlela Wokufaka

Amadokhumenti / Izinsiza

I-Altronix Maximal7FDV Finyelela Izilawuli zamandla [pdf] Incwadi Yeziqondiso I-Maximal7FDV Access Power Controllers, i-Maximal7FDV, Izilawuli zamandla okufinyelela, Izilawuli zamandla, izilawuli

Izithenjwa

• Imaniwali yosebenzisayo