I-Actel SmartDesign MSS Setha Kabusha Ukuphathwa Kokucushwa

Ulwazi Lomkhiqizo

I-SmartDesign MSS Reset Management Configuration iyisilawuli sokusetha kabusha esiphatha izinsiza zokusetha kabusha ku-chip ze-Actel SmartFusion microcontroller subsystem. Inikeza izinketho zokuveza amasiginali wokusetha kabusha i-chip ezingeni lomsebenzisi nokuphatha ivolumutage umlawuli. Ukuze uthole imininingwane egcwele ngokusetshenziswa, sicela ubheke Umhlahlandlela Womsebenzisi we-Actel SmartFusion Microcontroller Subsystem.

Izinketho zokumisa

• Setha kabusha ileveli ye-chip
• Ukusetha Kabusha Indwangu
• Voltage Umlawuli
• Inkinobho Yokusunduza Isiginali ibe Indwangu (PU_FAB_N): Uma ufuna ukushayela isignali yangaphandle engu-PU_N endwangu, sebenzisa le nketho ukuze uveze isignali ye-PU_FAB_N etholakala kumbobo yangaphandle engu-PU_N.

Imiyalo yokusetshenziswa komkhiqizo

• Uma usebenzisa i-SmartDesign MSS Reset Management Configuration, kubalulekile ukubhekisela Kumhlahlandlela Womsebenzisi we-Actel SmartFusion Microcontroller Subsystem ukuze uthole imininingwane ephelele ngokusetshenziswa. Nokho, nansi eminye imiyalelo evamile yokusetshenziswa:
  1. Khetha inketho efanelekile yokucushwa ngokusekelwe ezidingweni zakho.
  2. Landela imiyalelo enikezwe kumhlahlandlela womsebenzisi ukuze uphathe kahle izinsiza zokusetha kabusha ku-chip.
  3. Uma usebenzisa inketho Yokusunduza Kwenkinobho Yendwangu, veza isignali ye-PU_FAB_N etholakala kwimbobo yangaphandle engu-PU_N.
  4. Uma uphethe i-voltage-regulator, khetha inketho efanelekile ngokuya ngezidingo zakho.
• Uma udinga noma yikuphi ukwesekwa komkhiqizo okungewona ochwepheshe, njengezintengo noma isimo soku-oda, thintana Nesevisi Yekhasimende Yakwa-Actel usebenzisa izinombolo zocingo noma ifeksi enikezwe kuSithasiselo A semanuwali yomsebenzisi. Ukuze uthole ukwesekwa kobuchwepheshe, thintana ne-Actel Customer Technical Support Centre ngokusebenzisa yabo webisayithi noma izinombolo zocingo ezinikezwe kubhukwana lomsebenzisi.

MAYELANA NENKAMPANI

• I-Actel Corporation, iNtaba View, CA 94043
• © 2010 Actel Corporation. Wonke Amalungelo Agodliwe.
• Ishicilelwe e-United States of America
• Ingxenye #:5-02-00223-0
• Ikhishwe: Julayi 2010
• Ayikho ingxenye yalo mbhalo engakopishwa noma yenziwe kabusha nganoma iyiphi indlela noma nganoma iyiphi indlela ngaphandle kwemvume ebhalwe phansi ye-Actel.
• I-Actel ayenzi ziqinisekiso mayelana nalawa madokhumenti futhi ichitha noma yiziphi iziqinisekiso ezishiwo zokuthengiswa noma ukufaneleka ngenjongo ethile. Ulwazi olukule dokhumenti lungase lushintshe ngaphandle kwesaziso. I-Actel ayithwesi icala nganoma imaphi amaphutha angase avele kule dokhumenti.
• Lo mbhalo uqukethe imininingwane eyimfihlo okungafanele idalulwe kunoma yimuphi umuntu ongagunyaziwe ngaphandle kwemvume ebhaliwe ye-Actel Corporation.

Izimpawu zokuhweba

• I-Actel kanye nelogo ye-Actel yizimpawu zokuthengisa ezibhalisiwe ze-Actel Corporation.
• I-Adobe ne-Acrobat Reader yizimpawu zokuthengisa ezibhalisiwe ze-Adobe Systems, Inc.
• Yonke eminye imikhiqizo noma amagama emikhiqizo ashiwo yizimpawu zokuthengisa noma izimpawu zokuthengisa ezibhalisiwe zabanikazi bazo abafanele.

Izinketho zokumisa

• Isilawuli sokusetha kabusha siphatha izinsiza zokusetha kabusha ku-chip ye-SmartFusion™. Ukuze uthole imininingwane ephelele sicela ubheke Umhlahlandlela Womsebenzisi we-Actel SmartFusion Microcontroller Subsystem.
• I-Reset Management Configurator inikeza izinketho zokuveza amasiginali wokusetha kabusha i-chip ezingeni lomsebenzisi. Iphinde ikunikeze ngezinketho zokuthi ungayisebenzisa kanjani i-voltagumlawuli.

Setha kabusha ileveli ye-chip

• Ukunika amandla ukusetha kabusha izinga le-chip (MSS_RESET_N): I-MSS_RESET_N ingasetshenziswa njengokusetha kabusha kwangaphandle futhi ingasetshenziswa njengokusetha kabusha ileveli yesistimu ngaphansi kokulawulwa kwe-ARM® Cortex™-M3. Ungakwazi ukunika amandla isignali ye-MSS_RESET_N kulesi silungiseleli. Isiginali ye-MSS_RESET_N ibe isitholakala ukuze isetshenziswe ekwakhiweni. I-PADRESETENABLE bit kurejista ye-SOFT_RST_CR izosethwa ngokuzenzakalelayo i-Actel System Boot. Qaphela ukuthi, kusofthiwe yamanje, i-MSS_RESET_N imodelwe njengesignali yokufaka yangaphandle kuphela (Umfanekiso 1-1).
• Ukulibaziseka kokusetha kabusha kweleveli ye-chip: Isiqondiso se-MSS_RESET_N sizoshintsha ngesikhathi kusetshenziswa I-Actel System Boot lapho ukusetha kabusha izinga le-chip kunikwe amandla. I-MSS_RESET_N iwukukhiphayo okuthiwa kuphansi ngemva kokusetha kabusha amandla. I-Actel System Boot izomisa kabusha i-MSS_RESET_N ukuze ibe isignali yokufaka yokusetha kabusha lapho ukusetha kabusha izinga le-chip kunikwe amandla. Ukusetha kabusha ukulibaziseka kokususa ukubhampa ukulibaziseka phakathi kokumisa kabusha i-MSS_RESET_N njengokufakwayo nokunika amandla lokho kufakwa ukuze kusethwe kabusha i-SmartFusion. Lokhu kulibaziseka kungase kudingeke ukuze kuvunyelwe ukubhampa kwesignali yokusetha kabusha kwangaphandle noma ukuvumela i-chip yangaphandle yokusetha kabusha ukuze ibambe ukusetha kabusha kwangaphandle okushiwo isikhathi esithile ngemva kokuba i-SmartFusion iyekile ukushayela i-MSS_RESET_N.

Ukusetha Kabusha Indwangu

• Ukunika amandla i-MSS ukuze isethwe kabusha Indwangu (M2F_RESET_N): Isiginali yokusetha kabusha i-M2F_RESET_N inikezwa ngendwangu ye-FPGA. I-M2F_RESET_N igomela ngokuvumelanayo futhi yenqaba ngokuvumelana ne-FCLK. Ungakwazi ukunika amandla isignali ye-M2F_RESET_N kulesi silungiseleli. Isiginali ye-MSS_RESET_N ibe isitholakala ukuze isetshenziswe ekwakhiweni.
• Ukunika amandla Ukusetha kabusha Indwangu kuya ku-MSS (F2M_RESET_N): Uma kugonyelwa kusuka kundwangu ye-FPGA (futhi uma i-F2MRESETENABLE igonyelwa ku-SOFT_RST_CR) isignali ye-F2M_RESET_N ibangela ukuthi i-RCOSC kanye nemiphumela ye-MSS_RESET yesilawuli sokusetha kabusha igomele njengoba kuchazwe ku-Actler Subsystem User Guide. Ungakwazi ukunika amandla isignali ye-F2M_RESET_N kulesi silungiseleli. Isiginali ye-F2M_RESET_N isiyatholakala ukuze isetshenziswe ekwakhiweni.
• Ibhithi ye-F2MRESETENABLE kurejista ye-SOFT_RST_CR izosethwa ngokuzenzakalelayo i-Actel System Boot.

Voltage Umlawuli

• VoltagI-e Regulator okukhipha amandla phezulu: Uma idivayisi ye-SmartFusion engu-1.5V VCC ikhiqizwa ku-SmartFusion Vol.tage Okukhiphayo kwesilawuli, ungalawula ukuthi okukhiphayo IVULIWE ngokuzenzakalelayo ngemva kokuthi idivayisi iphumile ekusetheni kabusha (i-PoR). Kubalulekile ukuqaphela ukuthi ukuze uthole ukuziphatha kwe-ON idizayini kufanele idlule ku-Placeand-Route njengoba lokho kulungiselelwa kuhlelwe kusetshenziswa ama-flash cell. Kufanele uhlele idatha ye-FlashPro file (FDB) equkethe idatha yezinhlelo zendwangu.
• Voltage Ukulawula Isilawuli esivela ku-Fabric (VRON): I-VR ingase inikwe amandla ngaphansi kokulawulwa kwe-firmware, noma ngokusebenzisa isignali ye-FPGAVRON (imbobo ye-VRON kusihleli se-MSS) esivela endwangu ye-FPGA. Qaphela ukuthi isignali ye-FPGAVRON ifaneleka ngebhithi ye-FPGAVRONENABLE (kumele ilingane no-1) ku-VRPSM_CR. Uguquko olusuka phansi kuya kokuphezulu luyala i-VR ukuthi ivale.

Izinketho zokumisa
6 I-SmartDesign MSS Setha Kabusha Ukucushwa Kokuphatha Inkinobho Yokusunduza Isiginali Iya Endwangu (PU_FAB_N): Uma ufuna ukushayela isignali yangaphandle engu-PU_N endwangu, sebenzisa le nketho ukuze uveze isignali ye-PU_FAB_N etholakala kwimbobo yangaphandle engu-PU_N.

Ukwesekwa Komkhiqizo

I-Actel isekela imikhiqizo yayo ngezinkonzo ezehlukene zokwesekwa okuhlanganisa Isevisi Yekhasimende, Isikhungo Sokusekelwa Kwamakhasimende Ezobuchwepheshe, a web indawo, isiza se-FTP, i-imeyili, kanye namahhovisi okuthengisa emhlabeni wonke. Lesi sithasiselo siqukethe ulwazi mayelana nokuxhumana no-Actel nokusebenzisa lezi zinsizakalo zosekelo.

Insizakalo yekhasimende

Xhumana Nesevisi Yekhasimende ukuze uthole ukwesekwa kwemikhiqizo okungeyona eyobuchwepheshe, njengentengo yomkhiqizo, ukuthuthukiswa komkhiqizo, ulwazi lokubuyekeza, isimo soku-oda, nokugunyazwa.

• Kusukela eNyakatho-mpumalanga naseNyakatho Ephakathi kwe-USA, shayela ku-650.318.4480
• Kusukela eNingizimu-mpumalanga naseNingizimu-ntshonalanga USA, shayela ku-650. 318.4480
• Kusukela eSouth Central USA, shayela ku-650.318.4434
• Kusukela eNyakatho-ntshonalanga USA, shayela ku-650.318.4434
• Ukusuka eCanada, shayela ku-650.318.4480
• Ukusuka eYurophu, shayela ku-650.318.4252 noma +44 (0) 1276 401 500
• Ukusuka eJapan, shayela ku-650.318.4743
• Kuwo wonke umhlaba, shayela ku-650.318.4743
• Ifeksi, noma yikuphi emhlabeni 650.318.8044

I-Actel Customer Support Centre
I-Actel ineSikhungo sayo Sokusekela Ubuchwepheshe Bamakhasimende esinonjiniyela abanekhono eliphezulu abangasiza ekuphenduleni ihadiwe yakho, isofthiwe, kanye nemibuzo yokuklama. I-Customer Technical Support Centre ichitha isikhathi esiningi idala amanothi ohlelo lokusebenza nezimpendulo ze-FAQ. Ngakho-ke, ngaphambi kokuthi uxhumane nathi, sicela uvakashele izinsiza zethu ze-inthanethi. Kungenzeka ukuthi sesiyiphendulile imibuzo yakho.

I-Actel Technical Support
Vakashela i-Actel Customer Support webisiza (www.actel.com/support/search/default.aspx) ukuze uthole ulwazi olwengeziwe nokusekelwa. Izimpendulo eziningi ezitholakalayo ekuseshekeni web izinsiza zihlanganisa imidwebo, imidwebo, kanye nezixhumanisi kwezinye izinsiza ku-Actel web indawo.

Webindawo
Ungaphequlula ulwazi oluhlukahlukene lwezobuchwepheshe kanye nokungelona olobuchwepheshe ekhasini lasekhaya le-Actel, kokuthi www.actel.com.

Ukuxhumana Nesikhungo Sokusekela Abathengi
Onjiniyela abanekhono eliphezulu basebenza e-Technical Support Center kusukela ngo-7:00 AM kuya ku-6:00 PM, Isikhathi sase-Pacific, ngoMsombuluko kuze kube uLwesihlanu. Ziningi izindlela zokuxhumana neSikhungo:

I-imeyili

• Ungakwazi ukuxhumana imibuzo yakho yobuchwepheshe ekhelini lethu le-imeyili futhi uthole izimpendulo nge-imeyili, ifeksi, noma ucingo.
• Futhi, uma unezinkinga zokuklama, ungathumela i-imeyili umklamo wakho files ukuthola usizo. Sihlala siqapha i-akhawunti ye-imeyili usuku lonke. Lapho uthumela isicelo sakho kithi, sicela uqinisekise ukuthi ufaka igama lakho eliphelele, igama lenkampani, kanye nemininingwane yakho yokuxhumana ukuze kucutshungulwe ngempumelelo isicelo sakho.
• Ikheli le-imeyili losekelo lobuchwepheshe lithi tech@actel.com.

Ucingo

• Isikhungo sethu Sosizo Lobuchwepheshe siphendula zonke izingcingo. Isikhungo sithatha ulwazi, njengegama lakho, igama lenkampani, inombolo yocingo kanye nombuzo wakho, bese sikhipha inombolo yecala. Isikhungo sibe sesidlulisela ulwazi kulayini lapho unjiniyela wesicelo wokuqala otholakalayo ethola idatha futhi abuyisele ucingo lwakho. Amahora ocingo asuka ku-7:00 AM kuya ku-6:00 PM, Isikhathi sase-Pacific, ngoMsombuluko kuya kuLwesihlanu. Izinombolo Zosekelo Lobuchwepheshe yilezi:
  • 650.318.4460
  • 800.262.1060
• Amakhasimende adinga usizo ngaphandle kwezindawo zesikhathi zase-US angaxhumana nosekelo lobuchwepheshe nge-imeyili (tech@actel.com) noma uthinte ihhovisi lezokuthengisa lendawo. Uhlu lwamahhovisi okuthengisa lungatholakala ku www.actel.com/company/contact/default.aspx.

UHLU LOKUXHUMANA

• Ukulinganisa kwenkampani Actel Corporation
  • 2061 Inkantolo yase-Stierlin
  • Intaba View, CA 94043
  • USA
  • Ucingo 650.318.4200
  • Ifeksi 650.318.4600
  • Insizakalo yekhasimende: 650.318.1010
  • Isikhungo Sezicelo Zekhasimende: 800.262.1060
• Inkampani Actel Europe Ltd.
  • River Court, Meadows Business Park
  • Indlela Yesiteshi, Amanzi Amnyama
  • I-Camberley Surrey GU17 9AB
  • i-United Kingdom
  • Ucingo +44 (0) 1276 609 300
  • Ifeksi +44 (0) 1276 607 540
• I-Actel Japan
  • I-EXOS Ebisu Building 4F
  • 1-24-14 Ebisu Shibuya-ku
  • I-Tokyo 150
  • Japan
  • Ucingo +81.03.3445.7671
  • Ifeksi +81.03.3445.7668
  • http://jp.actel.com
• I-Actel Hong Kong
  • Igumbi 2107, China Resources Building
  • 26 Umgwaqo Wetheku
  • Wanchai
  • I-Hong Kong
  • Ucingo +852 2185 6460
  • Ifeksi +852 2185 6488
  • www.actel.com.cn

Amadokhumenti / Izinsiza

I-Actel SmartDesign MSS Setha Kabusha Ukuphathwa Kokucushwa [pdf] Umhlahlandlela Womsebenzisi I-SmartDesign MSS Reset Management Configuration, SmartDesign MSS, Setha Kabusha Ukucushwa Kokuphatha, Ukucushwa Kokuphatha

Izithenjwa

• Imaniwali yosebenzisayo